Kaffebox Profitec Steam nozzle 5x1 Silicon 70sh Gasket (seal) Steam Nozzle Replacement Part
68 NOK
Få tilgang til den komplette arken med grundig informasjon, sammenlign priser og identifiser funksjonene til PRODUKTNAMN, tilgjengelig til kostnaden av PRISVALUTA; det klassifiseres i KATEGORINAVN; selgeren er SELGERNAVN, og produsenten er PRODUSENTNAVN.
Fraktkostnad: 59 NOK
Tilgjengelighet: in stock
Leveringstid: 1-3 dager
Tilstand: new
Fraktkostnad: 59 NOK
Tilgjengelighet: in stock
Leveringstid: 1-3 dager
Tilstand: new
Sammenligning av lignende produkter
Kaffebox xBloom Studio Drip Tray Replacement Part
254 NOK
Overview The drip tray is the flat, removable tray that sits on top of the xBloom Studio's built-in scale. It serves two purposes: it catches overflow, drips, and small spills during brewing, and it provides a stable surface for your cup or server while the scale underneath tracks brew weight in real time. The tray lifts straight off the platform for emptying and cleaning, and xBloom confirms it is dishwasher safe. Every xBloom Studio ships with one drip tray, so this listing is for owners who need a replacement. Common reasons include a cracked or stained tray, or wanting a spare to swap in while the other is in the dishwasher. If you own the Moonlight White Studio and want a colour-matched setup, pick the white version. The black tray ships as standard with both the Midnight Black and Moonlight White machines. Why the drip tray matters for scale accuracy Because the Studio's scale sits directly beneath the drip tray, a warped or damaged tray can affect weight readings. The scale is accurate to 0.1 g up to 1,000 g and 1 g up to 2,000 g, and it relies on the tray transmitting weight evenly to the load cell. If your current tray is cracked, split, or no longer sitting flat, replacing it is worth doing before you start troubleshooting the scale itself. Specifications Product type Replacement part / spare Compatibility xBloom Studio (Midnight Black, Moonlight White, Twilight) Material BPA-free plastic Dishwasher safe Yes Function Drip/spill catcher, sits over the integrated scale platform What's in the box 1 × xBloom Studio Drip Tray
Kaffebox xBloom Studio Magnetic Dosing Cup Replacement Part
308 NOK
Overview The Magnetic Dosing Cup is part of the xBloom Studio's weighing and dosing workflow. In Copilot or Freesolo mode, you place the cup on the Studio's integrated scale, add whole beans until you hit your target dose (typically 5–18 g for a single pour-over), then tip the beans into the grinder hopper. The magnetic base keeps the cup seated on the platform while you're weighing, and the cup lifts off with a light tug when you're done. Every xBloom Studio ships with one dosing cup, so this listing exists for owners who need a replacement (cracked, lost, stained) or want a spare. If you own the Midnight Black machine and prefer a colour-matched look, the black version is the one that ships as standard. Moonlight White Studio owners who want a matching cup can pick the white version instead. How it fits into the workflow The dosing cup is used whenever you brew with your own beans rather than xPods. It works together with the Studio's 0.1 g precision scale to let you weigh a repeatable dose before grinding. Because the cup sits directly on the scale platform, the Studio can tare the cup weight automatically through the app or machine interface. If you grind for espresso on a separate machine, the cup's opening also fits a 58 mm portafilter basket, so you can transfer grounds without an extra funnel. Specifications Product type Replacement part / spare Compatibility xBloom Studio (Midnight Black, Moonlight White, Twilight) Dose range 5–18 g Material Food-grade plastic + food-grade silicone, BPA-free Attachment Magnetic (seats on the Studio's scale platform) What's in the box 1 × xBloom Magnetic Dosing Cup
Kaffebox Profitec Pro 400 Espresso Machine
18009 NOK
A compact E61 heat exchanger The Pro 400 is the smallest machine in Profitec's lineup, built around a heat exchanger (HX) boiler. A single 1.6 L stainless steel boiler produces steam, and brew water is drawn through a heat exchanger running inside that boiler, which is what lets the machine brew and steam at the same time. The E61 group head adds thermal mass and natural pre-infusion, the design prosumer machines have relied on for decades. A multifunction switch underneath the machine selects one of three PID-controlled boiler temperatures and turns pre-infusion and ECO mode on or off. Things worth knowing Because the temperature presets are set with a switch underneath the machine rather than a front control, the Pro 400 is meant to be set once for your routine rather than adjusted shot to shot. Brew pressure can be changed through the expansion valve if you want to move away from the factory setting. Dual gauges on the front show boiler pressure and pump pressure, so you can watch what the machine is doing during a shot. Specifications Boiler 1.6 L stainless steel, heat exchanger Brew group E61 with stainless steel mushroom Temperature control 3 preset PID temperatures (switch-selectable) Pre-infusion Switchable on/off Pump Vibration pump Brew pressure Adjustable via expansion valve Gauges Dual (boiler and pump pressure) Water tank 2.8 L, top-fill, automatic low-water shut-off Power 230 V / 1400 W Dimensions (W×D×H) 228 × 448 × 372 mm (without portafilter) Weight 21.5 kg What's in the box Bottomless portafilter with silicone attachment 7 g single basket 14 g double basket 21 g basket Blind filter Coffee tamper Brew group brush 3 pairs of colored valve disclets User manual https://www.youtube.com/watch?v=w-m0MMPzJY8
Kaffebox Profitec Pro 800 Hand Lever Espresso Machine
36959 NOK
User Manual Technical Data Dipper (one-circuit) system Heavy duty lever brew group (7.8 kg) Handles of the hand lever, lever valves and portafilters handcrafted American walnut Practical lever valves for steam and hot water extraction Large, pine green boiler pressure gauge PID control for regulating the boiler temperature Programmable ECO-Mode Switchable from water tank to a fixed water connection Connection to a water drainage is possible The vibration pump is only activated when using the water tank The vibration pump is not activated when using a fixed water connection 3.5 l copper boiler 2.8 l water tank with built-in adapter Drip tray with about a 1.25 l capacity High quality steam and hot water pipes A large removable cup tray Power usage: 230V/1600 W Weight: 35.5kg Dimensions (WxDxH): 339 x 505 x 492 mm without portafilter 339 x 593 x 740 mm with portafilter and lever up https://www.youtube.com/watch?v=7SrlG8iI4Zo
Kaffebox Profitec Pro 300 Espresso Machine
20009 NOK
Manual Download Technical Data Dual boiler 0.4 l coffee boiler with a ring brew group PID-display to regulate the temperature of the coffee boiler PID display showing the brewing time in seconds Programmable ECO-Mode 0.75 l stainless steel steam and hot water boiler Copper heating element Vibration pump Boiler pressure gauge Automatic shut-off when machine reaches low water volume 2.8 l water tank with built-in adapter Power usage : 230V/2200 W Weight 18 kg Dimensions (WxDxH): 255 x 415 x 385 mm without portafilter 255 x 475 x 385 mm with portafilter
Kaffebox Fellow Aiden Thermal Carafe Lid (Replacement Part)
354 NOK
What this part is This is the lid for the Aiden Precision Coffee Maker's thermal carafe, sold on its own as a spare. The carafe is not included. If you need both parts, the carafe and lid are also available together as a set. How a brew-through lid works Most thermal drip brewers use a lid with an opening in the top so brewed coffee runs straight from the filter basket into the closed carafe. The alternative, brewing with the lid off and fitting it afterwards, lets a full pot's worth of steam and heat escape at exactly the moment the coffee is hottest. Keeping the carafe sealed throughout is a meaningful part of how Aiden holds temperature without a hot plate. Practically, this means the lid is in the path of every brew. It sees hot coffee, coffee oils and steam on each cycle, and it is the component most likely to stain or pick up odours over time. Why owners buy a spare Two common reasons beyond simple breakage. The first is rotation: keeping a second lid means one can dry fully after washing while the other is in use, which matters because moisture trapped under a lid that goes back on damp is the usual cause of musty smells. The second is modification. Because Aiden's carafe fills from the top without a funnel to mix the stream, a large batch can end up stronger at the bottom than at the top, and a handful of owners have modified a spare lid to redirect the flow while leaving the original untouched. Stirring the carafe before pouring achieves the same thing without any modification. Care Rinse the lid under warm running water after each use and wash it with warm soapy water and a soft-bristled brush. Do not put it in the dishwasher. Avoid abrasive cloths and harsh household cleaners, which will scratch the finish. Dry it fully before storing it on the carafe, or leave it off so air can circulate. Specifications Compatibility Fellow Aiden Precision Coffee Maker thermal carafe Type Brew-through lid Included Lid only Dishwasher safe No, hand wash only What's in the box Aiden thermal carafe lid
Kaffebox Fellow Aiden Thermal Carafe + Lid (1.5L Replacement)
1008 NOK
A direct replacement for Aiden's carafe This is the same carafe and lid that ship with the Aiden Precision Coffee Maker, sold as a spare part. The body is double-walled stainless steel with a vacuum between the walls, which is why Aiden has no hot plate: the coffee holds its temperature instead of continuing to cook on a heating element, which is what produces the flat, bitter taste associated with older drip machines. The mouth is deliberately wide so the inside can be reached with a brush or a cloth. Coffee oils and tannins will stain the interior over time, particularly if a batch is left standing, so emptying and rinsing it after each pot is worth the habit. The magnet in the carafe Aiden detects whether the carafe is in position using a magnet built into the carafe itself. Pull the carafe mid-brew and the machine pauses; put it back and brewing resumes. Two practical consequences: a non-Fellow carafe will not work in its place, and the carafe should never be set on an electronic scale, since the magnet can throw off the reading or damage the load cell. How long it holds heat Fellow states the carafe keeps coffee above 43 °C (110 °F) for up to two hours. In practice, insulation works best when the vessel is full and pre-warmed. A small volume in a cold carafe loses heat noticeably faster, and several reviewers have flagged this as the machine's weakest point. Rinsing the carafe with hot water before brewing, and brewing closer to a full batch, both make a measurable difference. Care Hand wash the carafe and lid in warm, soapy water using a soft-bristled brush. Do not put either part in the dishwasher: the heat and detergent can damage the seal between the walls and dull the exterior finish. Skip abrasive pads and harsh cleaners. For built-up staining, a coffee equipment cleaner such as Cafiza or an oxygen-based cleaner, left to soak and then rinsed thoroughly, works better than scrubbing. Specifications Compatibility Fellow Aiden Precision Coffee Maker Capacity 1.5 L (10 cups) Material Double-walled, vacuum-insulated stainless steel Heat retention Above 43 °C for up to 2 hours (manufacturer figure) Carafe detection Built-in magnet, senses carafe position Dishwasher safe No, hand wash only What's in the box Aiden thermal carafe Carafe lid
Kaffebox Cafelat Parker Legris Fittings Replacement Parts
288 NOK
Overview These are the two stainless steel Parker Legris push-fit fittings that hold the flexible tube in place on the Cafelat Robot Barista's pressure gauge system. The straight fitting threads into the piston, the elbow fitting threads into the back of the gauge, and the FEP tube clips into both via the push-in collars. Pick the variant you need from the dropdown. Both versions are sold individually. Which one do I need? If your gauge has come loose or the tube won't seat properly at the gauge end, you need the elbow fitting. If the problem is at the piston end, where the tube meets the lever assembly, you need the straight fitting. If both fittings have failed (uncommon, but it can happen if the system was forced apart), order one of each. The full set is also included in the Pressure Gauge Kit if you're rebuilding the whole gauge system. Fitting and removing the tube Both fittings use the standard Parker Legris push-to-connect mechanism. To insert the tube, push it firmly into the collar until it seats. To remove it, press down on the locking collar and simultaneously pull the tube straight out. Forcing the tube out without depressing the collar will damage the internal grip ring and leak after reassembly. Straight vs. Elbow Feature Straight fitting Elbow fitting Connects to Piston Pressure gauge Body shape Inline (straight through) 90° angle Tool to fit 9 mm socket 13 mm spanner Thread 1/8 BSPP 1/8 BSPP Push-in size 4 mm 4 mm Material Stainless steel Stainless steel Weight approx. 5 g approx. 5 g What's in the box 1 × Parker Legris fitting (in the variant you select: straight or elbow) https://www.youtube.com/watch?v=njEDrwZkSmk
Kaffebox xBloom xPod Dock Replacement Part
418 NOK
Overview The xPod Dock is the removable holder that sits on the xBloom Studio's brew platform and keeps the xPod capsule centred and stable during the Autopilot brew cycle. It is a simple but necessary part: without it, the xPod has nothing to sit in while the machine grinds into it and brews. This listing is for the dock piece only, sold as a replacement or spare. When you might need one The xPod Dock ships with every xBloom Studio, so this is for buying it separately. Common reasons include replacing a cracked or worn dock, picking up a spare if you alternate between xPod and Omni Dripper brewing and want to keep things organised, or swapping to a different colour to match your Studio. The black dock ships as standard with both the Midnight Black and Moonlight White machines, so white Studio owners who want a colour-matched setup can pick up the white version here. Good to know The xPod Dock is only used for xPod-based Autopilot brewing. If you brew exclusively with your own beans using the Omni Dripper 2 (Copilot or Freesolo mode), you do not need this part. The dock simply lifts off the platform and the Omni Dripper docks magnetically in its place. Specifications Compatibility xBloom Studio Colours available Black, White Material Plastic What's in the box xBloom xPod Dock (1 unit)
Kaffebox Profitec Drive Dual Boiler Espresso Machine
33554 NOK
Overview The Profitec Drive is the company's flagship single-group dual-boiler machine, replacing the long-running Pro 700. The dual-boiler layout means you can pull a shot and steam milk at the same time, with the 0.75 L brew boiler dedicated to coffee and the 2.0 L steam boiler handling milk and the hot water tap. Both boilers are stainless steel, insulated, and individually PID controlled, so you can dial in brew temperature to the degree and toggle steam pressure between everyday and high-power settings (up to 2 bar). The brew group is a standard E61 with a flow control valve fitted from the factory. That gives you a needle valve directly above the group to slow or open the flow during the shot, which is the same hardware most enthusiasts add to E61 machines as a first upgrade. The rotary pump is quiet (notably quieter than vibratory pumps used in cheaper machines) and the machine can be run either from the 2.8 L front-access reservoir or plumbed directly into the mains, with the switch made under the drip tray with no internal modification. What the Drive adds over the Pro 700 Internally the Drive shares much of its plumbing with the Pro 700, but the user-facing changes are real. The new OLED display brings programmable pre-infusion (1 to 10 seconds pump, 1 to 60 seconds pause), a shot timer, programmable on/off scheduling, a fast heat-up mode, an ECO mode, and reminder functions for group cleaning and water filter changes. The steam and hot water valves switched from rotary knobs to joystick levers. Flow control is now standard rather than an add-on. The Drive is also slightly more compact in width than the Pro 700. Stainless steel vs. matte black The two versions are mechanically identical. The standard model is brushed stainless steel on all visible panels. The matte black version (Profitec item CM500009-02) replaces the side and top panels with a black powder-coated finish and wood detailing, while the gauges, drip tray cutout and "Profitec" rear logo remain in classic black on both. Choose based on kitchen fit, neither has a performance advantage. Specifications Group head E61 with factory flow control Boilers Dual stainless: 0.75 L brew + 2.0 L steam, insulated Temperature control Dual PID, independent brew and steam Pre-infusion Programmable active (pump-driven) and passive Pump Rotary, reservoir or plumb-in Water reservoir 2.8 L, front-access Steam pressure Adjustable, up to 2 bar (132 °C) Steam and water valves Joystick levers Display OLED with shot timer, scheduling, maintenance reminders Portafilter 58 mm, bottomless included Power 1600 W
Kaffebox 1Zpresso J Manual Coffee Grinder / manuell kaffekvern
2034 NOK
Package Contents: 1Zpresso J & cleaning brush Product specifications: Weight: 650±5g (1.4lbs) Dimensions: 15.8 x 5.7x13 cm Capacity of grounds chamber: 30-35g (depending on the bean type) Material: 304 stainless-steel, aluminum alloy, and wood. Replacement parts available: Rubber non-slip grip Wooden Knob or Skateboard Knob
Kaffebox Profitec Walnut Flow Control Handle
554 NOK
Overview This is a direct replacement handle for the Profitec E61 flow control device (item no. AC100094-00). The flow control itself is a stainless steel needle valve that mounts on top of the E61 group head, letting you restrict water flow during extraction for pre-infusion ramps, declining pressure, or gentler shots on light roasts. This handle is purely cosmetic: it doesn't change how the valve performs, only how it looks on top of the machine. The walnut wood version is designed to match Profitec's wood-accented line, including the JUMP, MOVE, PRO 800, and the matte black Drive that originally inspired the look. If you've already added walnut portafilter handles or lever-valve handles from Profitec's customization range, this completes the set on the flow control knob. How it differs from a flow control paddle Some flow control kits (notably the LUCCA and Lelit versions) use a wide wooden paddle instead of a knob. Paddles give you a longer lever arm and faster visual feedback on valve position, but they take up more space above the group and look quite different. The Profitec handle keeps the original knob shape and rotation feel, just in walnut instead of chrome. If you prefer the cleaner E61-style look and don't want a paddle protruding from your machine, this is the right upgrade. Specifications Material American walnut wood Compatibility Profitec flow control device, item no. AC100094-00 Function Cosmetic replacement, no change to flow behaviour Profitec item no. AC500055-00 Manufacturer Profitec GmbH, Germany Installation The original handle unscrews from the valve stem. Hold the body of the flow control device steady, twist off the stock knob, and screw the walnut handle on in its place. No tools required.
