Rcmester.no: Leker
Den Beste
Traxxas Tqi Telemetry Gps Speed Module 2.0
1005 NOK
upgrade your traxxas model with the tqi telemetry gps speed module 2.0! requires the tqi radio system with wireless module (#6511), tsm receiver (#6533), apple device running ios 9.0 or higher, or android-equipped device with android 4.4 and higher, and the traxxas link app (latest version available free on google play and the app store) real-time speed standard telemetry sensors use your vehicle’s gear ratio and tire size to calculate speed based on rpm. this system works well for hard surfaces, but wheelspin on loose surfaces causes inaccurate speed readings. the telemetry expander 2.0 with the installed gps module 2.0 provides the most accurate speed data possible. the traxxas gps module 2.0 uses both gps and glonass global positioning to deliver precise, real-time speed information via the traxxas link app on your tqi radio system with traxxas link wireless module. the gps module 2.0 installs easily inside the waterproof telemetry expander module 2.0 (#6550x, sold separately). the traxxas link app automatically recognizes the sensor with no other programming or setup required! once the gps module is installed, the speedometer reverts to gps speed instead of estimating the mph based on gearing and motor rpm. nothing needs to be reset; just select your preferred gauge and start receiving accurate speed data through the traxxas link app. important note the new gps module 2.0 (#6551x) and telemetry expander 2.0 (#6550x) replace the original telemetry expander (#6550) and gps module (#6551). the originals are not compatible with the new 2.0 versions. traxxas telemetry gps module 2.0 (#6551x) features uses gps and glonass global positioning for accurate, real-time speed speed readout not affected by gear ratio or tire-size easy plug-and-play installation; no programming required waterproof when installed automatically detected and configured by the traxxas link app easy to connect traxxas models equipped with the tqi radio system the telemetry expander 2.0 connects directly to the tqi receiver using the supplied #6525 communication link cable. x-maxx, e-revo, and unlimited desert racer install the telemetry expander 2.0 and gps module for even more accurate speed measurements compared to the built in speed output from the vxl-6s and vxl-8s electronic speed controls. plus, add the ability to install additional sensors to monitor parameters such as motor temperature. the telemetry expander connects directly to the vxl-6s or vxl-8s electronic speed control using the new traxxas data link cable
Top Pick
Traxxas Tqi Telemetry Expander Module 2.0
429 NOK
upgrade your traxxas model with the tqi telemetry expander 2.0! requires the tqi radio system with wireless module (#6511), tsm receiver (#6533), apple device running ios 9.0 or higher, or android-equipped device with android 4.4 and higher, and the traxxas link app (latest version available free on google play and the app store) expanded innovation traxxas telemetry changes the game by allowing you to monitor and record real-time data from your vehicle while you drive. add the gps module to the water-sealed telemetry expander and track the actual speed of your vehicle in real-time! the telemetry expander accepts up to six auto-detectable sensors in addition to the three standard traxxas sensors. there are currently three auto-detectable sensors to select from: voltage, temperature, and gps. the traxxas link application automatically recognizes sensors, so setup takes only a few moments! advanced communication bus technology allows you to connect the telemetry expander to your tsm receiver or to your high-voltage power amplifier, or directly to the vxl-6s and vxl-8s electronic speed controls with optional data cables. install the telemetry expander, choose your sensors, and prepare for an all-new rc driving experience! important note the new gps module 2.0 (#6551x) and telemetry expander 2.0 (#6550x) replace the original telemetry expander (#6550) and gps module (#6551). the originals are not compatible with the new 2.0 versions. traxxas telemetry expander (#6550) features includes receiver data cable (optional data cables available) installs quickly and easily; no parts to replace or swap waterproof case keeps the expander safe from the elements six available ports for connecting auto-detectable plug and play sensors ready to accept plug-in gps speed module (part #6551x, sold separately) the benefits of traxxas telemetry the traxxas tqi radio system, wireless link module, and traxxas link app transform your apple or android device into a powerful tuning tool with an intuitive, high-definition, full-color graphical user interface. adjust your radio trims and settings, vehicle profiles, update model memory, and tailor your vehicle for different driving conditions by means of a virtual dashboard and interactive screens. using the complete tqi system and traxxas link app makes pro-level transmitter tuning fast, convenient, and easy. open the dashboard from the traxxas link home screen to view data from telemetry-ready accessories and sensors. the application recognizes installed auto-detectable telemetry sensors for easy setup. record and save all displayed data to share with friends and other rc enthusiasts. the telemetry expander adds even more functionality with up to six additional sensors and the gps module. installation is quick and easy utilizing a single high-speed communications cable to the receiver, or to the high-voltage power amplifier or esc with optional data cables. unlock a whole new world of convenience and fun with...
Utmerket
Hobbywing Quicrun Brushless System Wp-16bl30 Esc+ 2435-4500kv Motor Combo For 1/16 And 1/18 Rc Red
844 NOK
this combo contains:quicrun-16bl30 esc+quicrun-2435-4500kv motor motor specifications: kv:4500 shaft diamater (mm):2.30 shaft length (mm): 10 rotor pole: 2 suitable car:1/18 & 1/16 on-road/off-road/buggy/truggy/monster lipo cells:2-3s resist:0.0498? no-load current(amp):1.5 max. output power(w):150 current at the point of m.o.p (amp):33 esc feature: waterproof and dustproof for all-weather races. color: red package total weight: 412.00 grams (incl. packaging) package size: 17.00 x 21.00 x 8.00cm factory description: hobbywing hobbywing quicrun brushless system: wp-16bl30 + 2435-4500kv combo for 1/16 & 1/18 rc red manufactured by hobbywing manufacturer number: hw/quicrun-16bl30+2435sl
Fremhevet
Tamiya M-08 Concept Chassis Kit
3044 NOK
this tamiya high-performance rear-wheel drive r/c chassis assembly kit is constructed around a rigid monocoque with the main frame split into front and rear sections. it offers superior rear high traction drive characteristics and fuss-free maintenance of parts such as the easy-access differential. c.v.a. (constant volume adjustable) oil shock-damped 4-wheel double wishbone suspension features dedicated long arms and steering linkage components for a range of setup options. a silky-smooth drivetrain utilizes full ball bearings, oil-filled gear differential unit and universal drive shafts. it can be assembled with a 210mm (s), 225mm (m) or 239mm (l) wheelbase, making it compatible with appropriately-sized existing tamiya m-chassis body parts sets. • 1/10 scale r/c model assembly kit. • the chassis is split into front (suspension and servo) and rear (motor and battery) sections. it can be assembled into three different wheelbases: s (210mm), m (225mm) or l (239mm). • rear-midship motor powers rear wheels via a differential in the mid-rear setup. • oil-filled differential gear used from the m-07. • features proven m-07 concept designs: suspension arms, uprights, suspension mounts and aluminum parts. • includes cva oil dampers, universal drive shafts, full ball bearings and hi-torque servo saver. • comes with new front suspension mounts (0 degrees) and hub carriers (2 degrees) for a total caster angle of 2 degrees. • compatible with m-06 chassis bodies. • requires: 2-channel radio, servo, esc, motor, 7.2-7.4volt battery pack & compatible charger, and body set. • compatible with m-07 concept hop-up option parts such as aluminum rear suspension mount (skid angle adjustment) (54787), aluminum rear uprights (54781) and low-friction king pin pipes (54813).
Alternativ
Hobbywing Xerun Axe540l R2 - 2800kv Crawler Combo
3044 NOK
børsteløs combo for 1/10 crawler sammensatt av xerun axe r2 esc og axe r2 540l 2800kv motor. settet er vanntett (ip67) og kan brukes med 2-3s lipo eller 6-9 cell nimh. motor må loddes til regulator. innebygget bluetooth modul for programmering og logging. esc kont./peak strømtrekk 60a/480a spenning 2-3s lipo/6-9 cell nimh bec 6v/7.4v @ 6a kontakt xt60 motor kv 2800 poler 4 diameter 36 mm lengde 57.8 mm vekt 234 g akseldiameter 3.175 mm
Hobbywing Quicrun 3650 G2 Brushless Motor 6.5t
798 NOK
produktinformasjon sensorbasert 2s lipo 1/10- og 1/12 5750kvsensorbasert børsteløs motor som blant annet passer 1/10- og1/12-biler. denne motoren skal brukes på 2s lipo. krever lodding, men leveres med kontakter. dette produktet leveres med sensorkabel og vil ikke funke med andre hobbywing-enheter som ikke bruker det samme systemet. spesifikasjoner akseldiameter 3.17mm diameter 36mm lengde 52.8mm vekt 194g kv 5750
Hobbywing Quicrun 2435sl-4500kv-Red-G2-Shaft-D2.3 Brushless Motor For 1/18 And 1/16 Rc Car
504 NOK
specifications: scale: 1/16 th & 1/18 th pole count: 2 kv rating: 4500 lipo cells: 2-3s no-load current: 1.5a power output: 150w current at the point of max. power output: 33a o.d: 24.00mm length: 36.5mm shaft diameter: 2.3mm weight: 73g package total weight: 150.00 grams (incl. packaging) package size: 10.00 x 15.00 x 6.00cm factory description: hobbywing quicrun 2435sl-4500kv-red-g2-shaft-d2.3 brushless motor for 1/18 & 1/16 rc car manufactured by hobbywing manufacturer number: hw/30404001
Hobbywing Quicrun Fusion Pro For Crawler 2300kv 540spec
1944 NOK
features: integrated design of hobbywing's patent technology: the integrated design of the esc makes the size similar to a 540 motor, and the overall weight is only 209g. this makes the layout and wiring of the car simpler while creating a cleaner overall chassis that also leaves more room for an interior. intelligent torque output & speed closed-loop control for easy control: the fusion system combined with intelligent torque output and closed-loop speed control means the power system will maintain the motor’s torque level and rpm as the vehicle conditions change. uphill, downhill, or under load, the intelligent output torque makes the operation more consistent. note: if the “rpm/throttle matching” is set to “disabled”, no intelligent torque output & speed closed-loop control, just like the brushed system. foc (field-oriented control) for super linearity & hightorque & extreme mute: the fusion system adopts foc driving mode so low-speed torque is strong, and it runs smoothly at very low speed. moreover, the motor is extremely silent when it is running. the driving noise which annoys the driver disappears. it is the best choice for a scale rock crawler. waterproof: applicable to all weather & track conditions: the ip-67 waterproof system has excellent waterproof and dustproof performance. you can easily drive in the mud, sand, ice, snow, and water. high driving efficiency for long battery life: foc offers high efficiency and reduced heat, dramatically extending runtime. benefitting from a sine wave driving mode, the motor runs silently and softly. professional drag brake adjustments & super parking capacity: 8 levels of drag brake force and 9 settings of drag brake rate allow a high level of tuning for different conditions and driver preference. the maximum drag brake force is about twice that of an ordinary brushless system of the same size, providing super strong parking capacity on a steep slope. advanced and secure electronic switch: compared to standard on/off switches, the dust, dirt, and waterproof electronic switch housing ensures a long reliable life for your power system, and will not suffer from the problems that will damage a mechanical switch. specifications: motor kv: 2300kv continuous current: 60a peak current: 200a input voltage: 2-3s lipo/6-9 cell nimh bec output: 6v/7.4v adjustable, 6a continuous (switch mode) note: 7.4v voltage can be output only when using 3s lipo input wires: 14awg, 330mm long input connectors: xt60 (factory installed) port programming: independent programing interface (switch position) size: 37x58mm weight: 209g w/wires includes: foc motor w/ built-in esc & factory installed xt60 plug requires: program card for quicrun ezrun xerun seaking series esc hw30501003
Arrma Dboots Hoons 53/107 2.9 Pre-Mounted Belted Tires, Silver, 17mm Hex, 5-Spoke (2)
544 NOK
medium compound dboots bakdekk
Hobbywing Quicrun Wp-Mini24 Brushless Esc For 1/24 Crawler
704 NOK
features: designed for smaller-scale crawling vehicles: the software, hardware, and structure of the quicrun wp mini24 are tailor-made for small-scale crawling vehicles. it has a large torque at low-speed and operates smoothly. the quicrun wp mini24 is the ideal choice for crawling vehicles for 1/16th, 1/18th, and 1/24th scale models. adjust drag brake force in real time: the esc programming port has an aux function. connect the signal cable (standard 2-pin cable) to an open channel on the receiver to adjust the drag brake force in real-time. adjusting drag brake force on the fly can be achieved to meet various application environments. all-weather operation capability: the esc's protection level reaches ip67. able to easily cope with various competition environments such as rain, dust, and sand with its excellent waterproof and dust-proof protection. note: the above-mentioned ip67 protection level is splash-proof, water-resistant, and dust-proof under normal use. it is not permanently effective, and the protective performance may decrease due to daily wear and aging. do not soak in water for a long time, otherwise the product may be damaged. built-in bec supported for high-voltage servo: the powerful switch mode bec has a maximum current of 6a. the output voltage is switchable between 6v/7.4v and is suitable for various standard/high-voltage servos on the market. waterproofing switch: the quicrun wp mini24 has a built-in waterproof switch with waterproof, dustproof, and impact-resistant. completely solved the traditional mechanical switch in dusty, humid, and other harsh environments frequent jamming, contact corrosion, impact (such as falling to the ground) and lead to the mechanical switch automatically shut down and other problems. easy to install: the quicrun wp mini24 uses a ph 2.0-3pin female connector. plug and play with hw motors or another brand of motors with the same plug. the input end uses a ph 2.0-2pin female connector. other models such as scx24 can plug and play. the common connector saves the trouble of re-soldering plugs. note: in addition, the esc comes standard with a brushed adapter cable for easy operation. support brushed and brushless modes: the quicrun wp mini24 supports both brushed and brushless motors with great compatibility. note: the factory default is the brushless mode. if you are connecting to a brushed motor, please connect the a/c line and set the esc to "brushed motor", otherwise the esc may be damaged. support various led/lcd programming boxes: the esc not only supports simple led programming boxes but also supports high-end products like lcd programming boxes with a more complete display. a vast variety of parameters: the quicrun wp mini24 has a vast variety of parameters for adjustment. a total of 13 adjustable parameters are available. it includes commonly used parameters such as drag brake force and drag brake acceleration. it can adjust accurately the power requirements to meet various application...
Hobbywing Ezrun 56118sd G2 Brushless Motor 1100kv
2444 NOK
produktinformasjon g2 8-12s lipo 1/5 bilerbørsteløs motor for 1/5 biler som krever 6-8s lipo. anbefales brukt sammen med max5 hv g2 esc. motoren leveres ferdigloddet med 8mm gullkontakter og fastmontert sensorkabel. spesifikasjoner akseldiameter 8mm diameter 56mm lengde 119.2mm vekt 1287g kv 1100 akseldiameter 8mm les mer hos hobbywing om motoren. product name ezrun 56118sd g2-650kv ezrun 56118sd g2-800kv ezrun 56118sd g2-1100kv product number 30402902 30402901 30402903 type scale brushed/brushless sensored/sensorless pole 1/5 th bl sd 4 1/5 th bl sd 4 1/5 th bl sd 4 relevant parameters kv rating lipo cells no-load current(a) 650kv 8-12s lipo 5.5a 800kv 8-12s lipo 6.9a 1100kv 6-8s lipo 8.0a size & weight o.d.(mm) length (mm) shaft diameter (mm) connectors (mm) weight (g) front bearing rear bearing 56 119.2 8 8.0mm (male) 1272g d22*d8*t7 d19*d8*t6 56 119.2 8 8.0mm (male) 1277g d22*d8*t7 d19*d8*t6 56 119.2 8 8.0mm (male) 1287g d22*d8*t7 d19*d8*t6 other parameters esc vehicles ezrun max5 hv g2 1/5 th buggy, truck examples: losi dbxl-e、 losi 5t electrified
Hobbywing Ezrun 5687sl Brushless Motor 1100kv
2398 NOK
hobbywing ezrun 5687sl brushless motor 1100kv er en motor beregnet for 1/5-skala biler med 3-6s lipo. leveres med påloddede 6.5mm gullkontakter som passer rett inn i f.eks hobbywing max5 eller max6 esc. spesifikasjoner akseldiameter 8mm motordiameter 56mm lengde 87mm vekt 916g kv 1100 lipo 3-8s for utfyllende detaljer besøk hobbywing sin produktside. product name ezrun-56113sl-800kv ezrun-5687sl-1100kv ezrun-4985sl-1250kv ezrun-4985sl-1650kv product number 30402900 30402550 30402951 30402950 type scale brushed/brushless sensored/sensorless pole count 1/5 th bl sl 4 1/5 th bl sl 4 1/6 th&1/7 th bl sl 4 1/6 th bl sl 4 relevant parameters kv rating lipo cells no-load current(a) 800 3-8s 3.2 1100 3-8s 4.1 1250 3-8s 5.2 1650 3-6s 5.4 size & weight o.d.(mm) length (mm) shaft diameter (mm) connectors (mm) weight (g) front bearing rear bearing 56(2.20in) 113(4.45in) 8.0(0.31in) 6.5(male) 1210(42.68oz) d8*d22*t7(608dd/608zz) d8*d22*t7 56(2.20in) 87(3.43in) 8.0(0.31in) 6.5(male) 916(32.31oz) d8*d22*t7(608dd/608zz) d8*d22*t7 49(1.92in) 86.5(3.41in) 5.0(0.20in) 6.5(male) 636(20.71oz) d19*d6*t6 49(1.92in) 86.5(3.41in) 5.0(0.20in) 6.5(male) 587(20.71oz) d19*d6*t6 other parameters timing
Hobbywing Ezrun 56113sl Brushless Motor 800kv
2144 NOK
børsteløs motor for 1/5 biler med opp til 8s lipo. anbefales brukt sammen med max5 esc. spesifikasjoner akseldiameter 8mm diameter 56mm lengde 113mm vekt 1210g kv 800 for utfyllende detaljer besøk hobbywing sin produktside.
Arrma Big Rock Crew Cab 4x4 3s Blx Painted Decaled Trimmed Body (Black)
594 NOK
overview: this big rock crew cab 4x4 blx bodyshell is the perfect replacement for the kit supplied item. ideal if you want to freshen the look of your old bodyshell. strong and hard-wearing with eye-catching arrma trim scheme, this pre-painted, pre-decaled body is supplied trimmed and is ready to fit straight to your vehicle. awesome looks with tough arrma durability, with no need for complicated cutting or fitting to go out and hit the dirt. features: matte black arrma trim scheme for realistic stealthy looks - strong and durable polycarbonate for long-lasting performance during extreme bashing action - pre-trimmed for fast and hassle-free fit - pre-painted and decaled for arrma bashing looks and fast replacement of your kit bodyshell - pre-drilled body mounting holes for easy fit - aggressive looks and realistic detailing for awesome monster truck styling includes: 1 x big rock crew cab 4x4 3s blx painted, decaled and trimmed bodyshell (black) manuals quick start guides warnings and warranties maintenance and tuning
Hobbywing Quicrun 3650 G2 Brushless Motor 8.5t
798 NOK
br produktinformasjon sensorbasert 2s lipo 1/10- og 1/12 4560kvsensorbasert børsteløs motor som blant annet passer 1/10- og1/12-biler. denne motoren skal brukes på 2s lipo. krever lodding, men leveres med kontakter. dette produktet leveres med sensorkabel og vil ikke funke med andre hobbywing-enheter som ikke bruker det samme systemet. spesifikasjoner akseldiameter 3.17mm diameter 36mm lengde 52.8mm vekt 186g kv 4560
Leker Rcmester.no Beste Produkter
Hobbywing Xerun 4268 G3 Brushless Motor 2200kv
1744 NOK
sensorbasert børsteløs motor på 2200kv. passer til bl.a. 1/8 skala konkurranse bruk. spesifikasjoner akseldiameter 5mm diameter 42mm lengde 68mm vekt 325g kv 2200 specifications scale 1/8 pole count 4 kv rating 2200 lipo cells 2-6s no-load current(a) 4.5 o.d.(mm) 42 length (mm) 68 shaft diameter (mm) 5.0 weight (g) 325g timing 20-40 degrees(adjustable) suitable for 1/8th sct, buggy and touring car turbo timing technology full sensored mode (when paired with xr8 esc) adjustable timing (bi-directional) 20-40 degrees advanced hall sensor system low cogging 4-pole-8-magnet "staggered pole" rotor - hobbywing patented design guarantees users the effective heat dissipation and dust prevention the use of double insulated windings (240°c r-rated), nmb bearings from japan, and the high-intensity adhesive (340°c) guarantees users the outstanding performance and super durability.
Hobbywing Multifunction Lcd Program Box V2
484 NOK
programmerings boks til programmering og oppdatering av hobbywing børsteløse regulatorer. lcd skjermen gjør den brukervennlig og oversiktlig. kompatibel med platinum serien, xerun serien, ezrun serien og seaking pro serien. spesifikasjoner størrelse 91 x 51 x 17mm vekt 65g inngangspenning 4,5v - 12,6v obs! hvis regulator ikke har bec er det nødvendig med et eget batteri for å kunne bruke programmerings boks.
Hobbywing Quicrun Fusion Mini16 Foc System 3000kv
946 NOK
hobbywing quicrun fusion mini 16 2 in 1 foc-integrert kraftsystem som er egnet for 1/18 og 1/16 skala modeller i bransjen. rammeoppsettet er kompakt med dimensjonene 24x 42mm og en lett vekt på 72g (inkludert ledninger og plugger). den lille størrelsen på fusion mini16 er estetisk vakker og løser ledningsproblemer på mindre crawler-kjøretøy. fusion systemet kjennetegnes ved ekstremt stille gange og mye kraft/nøyaktighet ved lave turtall, perfekt for crawlere. beregenet for bruk med 2-3s lipo / 6-9 celler nimh, og kommer med ec2 kontakt. systemet har høy effektivitet, genererer mindre varme, og forlenger driftstiden, mens motoren går mer stillegående og jevnt. med en ip65 beskyttelsesgrad kan det kjøre under alle forhold. systemet tilbyr intelligent dreiemomentutgang og lukket hastighetskontroll for presis håndtering. det inkluderer også justering av aktiv dragbremskraft, noe som gir overlegen holdeevne i bakker. dette systemet oppdateres med led program box. spesifikasjoner fra produsent passer for 1/18 og 1/16 skala crawlere børsteløs ja sensor/sensorløs sensor ip-grad ip-65 strømtrekk maks 80a kont. bec 6v/7.4v justerbar, kont 4a (switch mode) batteri 2-3s lipo eller 6-9 cell nimh kv 3000 størrelse 24x 42mm aksling diameter: 2.3mm / lengde: 13.5mm ledninger 18awg 150mm kontakt ec2 vekt 72g inkl. ledning og kontakt utstyrt med en sterk innebygd brytermodus-bec, leverer systemet en kontinuerlig strøm på opptil 4a og støtter veksling mellom 6v og 7,4v, noe som gjør det i stand til å drive høy-torque og høyspenningsservoer. det inkluderer også flere beskyttelsesfunksjoner: lav spenning på batteriet, overoppheting, gass-tap og låsebeskyttelse. for enkel esc-parameterinnstilling støtter den led- og lcd g2/pro-programboksene.
Hobbywing Quicrun Fusion 8ight Foc System 2300kv
2228 NOK
quicrun fusion 2in1 foc system 2300kv har integrert drivsystem med field-oriented control (foc), spesifikt designet for 1/8 skala-modeller. det kompakte rammeoppsettet måler 42x 69 mm og gir en kraftfull, men plassbesparende løsning for byggere. det integrerte designet gjør systemet svært enkelt å installere, og gir et ryddig og stilrent oppsett. beregnet for bruk med 2-4s lipo / 6-12 celler nimh batterier og kommer med xt60 kontakt. hele kraftsystemet har ip67-klassifisering, som gir utmerket beskyttelse mot vann og støv. denne robuste beskyttelsen gjør at det kan takle utfordrende terreng som sand, is, snø og vann, og sikrer pålitelig drift under ulike klimaforhold. fusion 8ight er et børsteløst foc-system. hobbywings unike field-oriented-control (foc) gir svært jevn kontroll, med en respons og følelse som er uten sidestykke. ikke bare er hobbywings foc-teknologi ekstremt jevn og kraftfull, den gir også tilnærmet lydløs drift og en fantastisk kjøreopplevelse. spesifikasjoner fra produsent passer for 1/8 skala crawlere børsteløs ja sensor/sensorløs sensor ip-grad ip-67 strømtrekk maks 240a kont. bec 6v/7.4v/8.4v justerbar, kont 6a (switch mode) batteri 2-4s lipo eller 6-12 cell nimh kv 2300 størrelse 42x 69mm aksling diameter: 5mm / lengde: 18.5mm ledninger 13awg 250mm kontakt xt60 vekt 338g inkl. ledning og kontakt støtter ulike led / lcd programmeringsbokser. esc-en er kompatibel med både grunnleggende led-programmeringsbokser og avanserte lcd-programmeringsbokser.
Hobbywing Quicrun Wp-880 Dual Brushed Waterproof 80a Esc (2-4s)
639 NOK
features: fully waterproof design for all conditions. (note: please clean and dry it after use for avoiding rusty connectors). hobbywing patented copper heat-conductive plates attached to the mosfet board allows the internal heat to be quickly transferred to the aluminum heat sink for great heat dissipation. built-in switch-mode bec with cont. current of 4a. tunable drag brake and drag brake rate for different vehicles, tracks, and control feel. adjustable pwm frequency combined with advanced freewheeling (/deo) technology guarantees great throttle linearity and driving feel. 9 levels of acceleration/ punch from soft to aggressive for different vehicles, tires and tracks. proportional brake with 9 levels of initial brake force, maximum brake force, and drag brake force. multiple protections: low-voltage cutoff protection, thermal protection, and throttle signal loss protection. separate programming port to easily connect the led program card (purchase separately) to the esc. esc programming via hobbywing led program card (purchase separately). specification: cont. current 80a / peak 400a reverse cont. current 30a / peak 180a fwd/rev resistance: 0.001ω / 0.002ω motor type supported: brushed motor (540, 550, 775 size motor) applicable car: various 1/10th & 1/8th vehicles, short course, monster truck, truggy, rock crawler, tanks and boats motor limit: brushed motor (540, 550, 775 size motor) brushed motor limit with 2s lipo /6s nimh: ≥ 12t or rpm<30000@7.4v (540, 550 size motors) brushed motor limit with 3s lipo /9s nimh: ≥ 18t or rpm<20000@7.4v (540, 550 size motors) brushed motor limit with 4s lipo /12s nimh: ≥ 24t or rpm<15000@7.4v (540, 550 size motors) lipo / nimh cells: 2-4s lipo or 5-12s nimh bec output: 6v @ 4a (switch-mode) pwm frequency: adjustable 1k/2k/4k/8k/16k connectors: input end: no connectors; output end: 4.0mm female bullet connectors size / weight: 45.9*34.7*26.5mm / 75g programming port: led program box (purchase separately) waterproof: yes dual mode: yes note: wp-880-dual brushed esc has two outputs to drive 2 motors. when driving 2 motors simultaneously, the turn of the motors needs to be increased.
Skyrc Gyro Gc401 For Biler
428 NOK
gyro for biler, kobles mellom mottaker og styreservo. gyroen vil hjelpe til å rette opp bevegelse på bilen, som ikke kommer som en input fra senderen/føreren. gc-401 har tre kjøremoduser med ulik sensitivitet. spesifikasjoner: innspenning dc: 4-8.4v strømtrekk: 25ma størrelse: 21x21x11mm vekt: 3.6gram
Hobbywing Xerun Xr8 Plus G2s 200a 2-6s
2344 NOK
200a! 2-6s lipo konkurranse regulator! hobbywing xr8 xr8 plus g2s er en konkurranseregulator for 1/8 buggy. denne regulatoren har beskyttelse mot reversert polaritet, frameless fan deisgn, effektiv kjøling og intern bec. xr8 plus bruker 11awg ultra soft silikonkabler slik at du lettere kan bøye kablene i retningen du ønsker. du kan også enkelt programmere xr8 plus ved hjelp av hobbywings ota module box eller med lcd modulen. reverse polarity protectedpro g2s elite sikrer deg mot skade på esc ved feil tilkobling av pluss og minuspoler. nytt viftedesign!denne regulatoren ser enda bedre ut en før! viftedesignet er nå rammeløst, dette gjør viftene mer holdbare der dem har fått tykkere blader og enda bedre kjøling. i tillegg vil den se enda "renere" ut enn noen gang! rpm speed limitregulatoren støtter opptil 6 forskjellige hastighetsvalg (rpm) tilmøte behovene og kravene til ulike konkurranser i verden.den kan programmeres ved å bruke den nyeste ota bluetooth-modulen eller den tradisjonelle 3-i-1 programboksen. kommunikasjon er nøkkelenhobbywing har her integrert regulatoren med en ny kommunikasjon protokol som betyr raskere oppdateringer ved bruk av lcd boksene til hobbywing. lcd programming module anbefales ved kjøp av programmeringsboks (ikke inkludert). real-time dataom ønskelig har man også muligheten til å koble opp hobbywings ota modul for å få real-time data. spesifikasjoner skala 1/8 biler type børsteløs/sensored vanntett nei innspenning 2-6s lipo bec out 6-8.4v kabler 11awg 200mm kontakter ikke inkludert størrelse 56.1 x 42.1 x 38.5mm vekt m/kabler 122g
Hobbywing Xerun Xr8 Plus 150a Brushless Esc 2-6s
1844 NOK
hobbywing xerun xr8 plus, en flott børsteløs regulator til 1/8 skala, ofte brukt i konkurransesammenheng. går sammen med 2-6s lipo, medfølger løse kabler som må loddes, men kontakter følger ikke med. størrelse 58,7 x 48 x 36,9mm vekt 127g uten ledninger product details in english specification cont./peak current 150a/950a motor type sensored / sensorless brushless motor main applications 1/8 on-road, buggy, truggy lipo/nimh cells 2-6s lipo, 6-18s nimh bec output 6v/7.2v switchable, continuous current of 6a (switch-mode bec) cooling fan powered by the stable bec output voltage of 6v/7.2v size 58.7(l) x 48(w) x 36.9(h) weight 127g (w/o wires) programming port fan/prg port esc programming lcd program box, wifi module enabled motor limit: 4s lipo/12s nimh <= kv3000 for 4274 size 6s lipo/18s nimh <= kv2400 for 4274 size super built-in bec with the peak output current of up to 15a and switchable output voltage of 6v/7.2v advanced electronic switch with the lifespan of over 50000 times of switching on & off high-efficiency heat-dissipating system special dynamic timing control program is available when this esc runs in full-sensored mode innovative coasting function (patent pending) esc customization by a lcd program box (purchase separately) or wifi express module (purchase separately)
Hobbywing Ezrun Max5 Hv G2 250a 6-12s Sensored Wp Esc 1/5
3044 NOK
the hobbywing ezrun max5 g2 1/5 scale waterproof brushless esc is a 12s capable esc designed for 1/5 scale power! the max5 provides the ultimate power upgrade solution for many popular 1/5 scale vehicles like the hpi baja buggy, losi 5ive-t nitro-to-electric truck, and desert buggy xl nitro-to-electric buggy. it is also suitable for various other brands of 1/5 scale on-road cars, buggies, and truggies. the strong explosive, stable output power, together with excellent low-speed linearity, ensures the esc meets various application requirements such as; violent start-up, straight-line high-speed, flying slopes, low-speed walking, etc. note: for peak performance, it is recommended to pair this esc to the hobbywing ezrun 56118 sd g2 motors. features: enhanced performance: the esc supports up to 12s lipo with a maximum output current of up to 250a. intelligent freewheeling technology: the innovative intelligent freewheeling technology effectively reduces heat generation and enables the esc to have higher driving efficiency. turbo timing technology: the esc is able to support up to 24 degrees of turbo timing adjustment. continuous current: 250a peak current: 1,600a motor type: sensored / sensorless brushless motor (only in sensorless mode) applications: 1/5th touring car, buggy, truggy, and truck lipo/nimh cells: 6-12s lipo bec output: 6v/7.2v/8.4v switchable, continuous current of 8a (switch-mode) connectors: input end: none, output end: female 8.0mm gold connectors (pre-soldered onto the pcb of the speed controller) size (lxwxh): 94.5x59.4x50.9mm weight: 428.5g programming port: independent programming port
Hobbywing Ezrun Max8 G2 160a Brushless Esc 3-6s
1944 NOK
160a! 3-6s kompatibel designet for 1/8 biler hobbywing ezrun max8 g2 er vannbestandig og leveres med ferdig påloddet motorkontakter (6,5mm female gullkontakt) og xt90 batterikontakter i serie. regulatoren er kompatibel med 3-6s lipo. sensormodus & fleksibelmax8 g2 esc er den mest ettertraktede esc på markedet. det er dynamiske og dominerende spesifikasjoner møter behovene til maktsyke brukere. den har en sterk utgangseffekt med utmerket linearitet ved lav hastighet og fungerer i fullsensormodus. smart teknologiutviklet av hobbyving, skaper høyere driveffektivitet og lavere driftstemperatur. temperaturen er nå 25 grader kjøligere sammenlignet med forrige generasjon av max8. dette øker den generelle påliteligheten til esc. effektiv kjølingden rammeløse viftedesignen er en patentert teknologi. den raske overføringen av intern varme til husets radiator består av høy luftstrøm fra siden av viften og en varmeledningsvask av kobber på den interne strømplaten. disse er innebygd i høypålitelige termiske systemer for å sikre at den alltid er i god termisk tilstand. turbo-teknologidenne escen vil være en perfekt kombo i lag med ezrun 4268/4278 sd for maksimal ytelse. turboparameterene at justerbare og har muligheten til å nå opptil 25% mer fart enn den tidligere versjonen. thermal protectionkondensator termisk beskyttelse implementert av esc effektivt vil forhindre kondensatorer fra å eksplodere og forårsaker irreversibel skade på esc på grunn av overbelastning. sanntidsdata- og dataloggingsfunksjonerved bruk av ota-module kan du bruke dataregistreringsfunksjonen for å få tilgang til driftsstatus. gjelder for alle værforholdip-67-systemet garanterer utmerket vann- og støvtettingsbeskyttelse. hele kraftsystemet er i stand til å kjøre på en rekke overflater, inkludert gjørmete, sand, isete, snødekt og vann uten å skade kraftenheten. innebygd becesc har en innebygd bec som kan støtte en maksimal utgangsstrøm på opptil 15a og utgangsspenningene kan byttes mellom 6v, 7,4v og 8,4v. dette sikrer at esc er i stand til å støtte de krevende servoene med høyt dreiemoment på markedet. stor innebygd kondensatormax8 g2 har tre innebygde 680uf kondensatorer, noe som øker ytelse med 74 % (870uf) sammenlignet med max8 esc. deultrastore kondensatorer bygd på esc sikrer også at brukerne ikke gjør det trenger å installere eksterne kondensatorer på de fleste kjøretøy. nytt sensorbasert kabel interfacemax8 g2 esc er utstyrt med en ny type sensorert kabelgrensesnitt. det er sterkt anbefalt å bruke motorene fra hobbywing da det vanntette beskyttelsesnivået er på høyeste nivå (ip67).
Hobbywing Quicrun Wp 1060 60a Brushed Esc 2-3s - Deans Kontakt
384 NOK
60a 2-3s lipo / 5-9 nimh deans-kontakt quicrun 1060, 60a børsteregulator som er vann og støv beskyttet. passer til de fleste 1/10 biler med børsteoppsett, leveres med deans strømkontakt (bildet viser deans hunnkontakt, dette er feil, det er hannkontakten som sitter på regulatoren), og programmeres enkelt via jumper. kan brukes med 2-3s lipo eller 7,2v - 10,8v nimh batterier. størrelse 36,5 x 32 x 18mm vekt 39g batterikontakt deans / t-plugg bec output 3a / 6v manual: quickrun1060
Hobbywing Ezrun 18a Brushless Esc
344 NOK
this is a ezrun series "sport" for 1/18 r/c cars. features : compatible with sensorless brushless motors. top quality components, high current endurance. excellent start-up, acceleration and linearity features. many programmable items. suitable for various chassis, tires and racing tracks. multiple protection features: low voltage cut-off protection / over-heating protection / throttle signal loss protection. internal timing can be changed easily to make the esc suitable for various motors. specification: output: continuous 18a, burst 50a input: 4-9 cell nimh/nicd or 2-3s lipo bec: 6v/1a (linear mode built-in bec) resistance: 0.01 ohm motor supported: sensorless brushless motor suitable car: 1/18 on-road sport cooling fan: not included size: 31.5mm(l) * 27.5mm(w) * 15mm(h) weight: 19g (without wires) suitable motor: with 4-6 cell nimh/nicd or 2s lipo: on-road≥12t, off-road≥8t; with 6-9 cell nimh/nicd or 3s lipo: on-road≥18t, off-road≥24t package total weight: 108.00 grams (incl. packaging) factory description: hobbywing ezrun-18a-sl manufactured by hobbywing manufacturer number: hw/81010020
Tamiya Gr Yaris Lw Body
544 NOK
informasjon på engelsk: this is a polycarbonate body of the toyota gr yaris. the lightweight version of the body parts is a great option for those competing in m-chassis class races as it provides a nimbler handling model and lower center of gravity. the body comes complete with vinyl stickers to complete the window trim, headlights, tail lights and other markings. a handy window masking seal is also included for easy masking of the windows when painting. • lightweight yet durable 0.8mm thickness polycarbonate compared to the standard 1.0mm offered in the standard body parts set. • separately molded parts are included to depict side mirrors. • comes with stickers to recreate markings, plus window masking stickers for use when painting. • compatible with 239mm (l) wheelbase m-05, m-05 pro, m-05 ver.ii pro and m-07 concept chassis cars. skala 1:10 merke tamiya chassis m-05, m-05 pro, m-05 ver.ii pro, m-07, m-08 wheelbase 239mm manual-body_toyota_yaris_wrt_beiblatt
Spektrum Firma 2-In-1 Brushless Crawler Motor/esc: 1400kv
1548 NOK
product detailsthe spektrum firma sensored 2-in-1 system is specifically engineered to be used with 10th scale crawlers and scalers. featuring advanced field-orientated control (foc) and professional drag brake performance and torque control. key features pro-level drag brake performance and adjustability compact for easy installation in most applications ready to install — no soldering required integrated 40a / 160a esc industry leading waterproof design in the box (1) spektrum firma brushless sensored 2-in-1 system 1400kv (1) product manual needed to complete spektrum™ surface receiver 2s or 3s lipo battery with ec3 or ic3 connector spektrum transmitter key benefits 2-in-1 esc motor combo: compact option for detailed scale builds where space is limited advanced sensored motor control: great for slow speed driving and next level drag brake performance industry leading waterproof design: the firma 2-in-1 brushless crawler motor/esc provides industry leading waterproof and dustproof operation for worry-free driving in mud, sand, snow and water multi-point protection: over-current protection automatic lipo low-voltage cutoff thermal protection failsafe protection features pro-level drag brake performance and adjustability rpm/throttle matching enabled foc (field-oriented control) equipped integrated 40-amp esc (160amp burst) 2-3s lipo/6-9 cell nimh input voltage range industry leading waterproof design fully programmable with optional spektrum esc programmer box (not included) developed and designed by spektrum ™ engineers, in partnership with the industry's leading esc and brushless motor manufacturer compact for easy installation in most applications ready to install — no soldering required adjustable high-power bec (6v or 7.4v) firmware updatable through the spektrum esc programming box high heat resistant ic3 connectors, backwards compatible with ec3 connectors limited 1-year warranty the ultimate compact crawler solution the spektrum firma sensored 2-in-1 system is specifically engineered to be used with 10th scale crawlers and scalers. featuring advanced field-orientated control (foc) and professional drag brake performance and torque control, all while being fully waterproof. the compact 2-in-1 design grants builders the ability to reduce clutter and components, giving you the most room for scale accessories and customization. the integrated design makes the size similar to a 550 can size motor, making it a easy drop-in option for most 1/10 scale crawler, scaler and trailer models. available in a low speed 1400kv option for extreme slow speed and high angle of attack performance. and a high speed 2300kv for excellent control for trailers and rock bouncers. field-oriented control the spektrum firma sensored 2-in-1 system features a high-precision magnetic encoder and rotor position sensor that provides excellent 1 to 1 control feel when driving at any speed and at any angle. perfectly suited for trail driving, rock crawling competitions and...
Power Hd Lw-20mg Waterproof Servo 20kg/0.16s
544 NOK
power hd lw-20mg har aluminium kasse og coreless motor. servoen er vanntett noe som gjør denne godt egnet til crawlere, 1/8 buggy og monstertruck. leveres med festeskruer og to horn. 25t. torque(4.8v): 16.5 kg-cm (229.1 oz/in) torque(6.6v): 20.0 kg-cm (277.7 oz/in) speed: 0.18 sec (4.8v) │ 0.16 sec (6.6v) operating voltage：4.8 ~ 6.6 dc volts weight: 60 g (2.12 oz) bearing type：ball bearing x 2 motor type：dc motor gear type：copper & aluminum operating temperature：-20℃~60℃ working frequence：1520μs / 333hz size：40.7 x 20.5 x 39.5 mm ( 1.60 x 0.80 x 1.55 in)