Thomannmusic.no: Byggematerialer
Den Beste
t.akustik Rehearsal Room Set L Advanced
25362.5 NOK
t.akustik Rehearsal Room Set L Advanced@+*Bundle offer comprising*, 3x t.akustik WAS-7 Melamine GR@+*Set of Absorber Panels*, Absorber for optimising room acoustics, Absorber type: Tips, The precisely cut panels allow different t.akustik models (e.g. WAW-7) to be combined and joined together, The absorption capacity has been optimised through a special design, The correct use of absorbers reduces flutter echoes, optimises room acoustics and gives the room a professional atmosphere, Effective range: From approx. 800 Hz, Material: Melamine resin foam, Fire behaviour according to EN13501-1, Euroclass C s2,d0 flame retardant, Sound absorption coefficient: >0.9 from approx. 600 Hz, Dimensions (L x W x H) : 600 x 70 x 70 mm, Colour: Grey, Set of eight individual absorber panels, Suitable glue: Art. #481723# (not included), 14x t.akustik CBT-37 Melamine GR@+*Absorber Plate Set*, Absorber for optimising acoustics, Especially suitable for the absorption of low frequency sound waves, Material: Melamine resin foam, Fire behaviour in accordance with EN13501-1, Euroclass B - s1, d0 flame retardant, Sound absorption coefficient: > 0.9 from approx. 600 Hz, Dimensions (L x W x H): 370 x 370 x 600 mm, Colour: Grey, Set contains 2 individual pieces, 3x t.akustik WDS-7 Diffuser Set 4pcs@+*Diffuser for Optimising Room Acoustics*, Diffuser profile: Stepped, The coverage pattern has been optimised by a special design, The correct use of the WDS-7 optimises the room acoustics and gives the room a professional atmosphere, Its light weight makes it inexpensive and easy to install, Can be painted or lacquered with water-based paints (use only paints without solvents!) and thus offers the possibility of free colour composition, Material: EPS (Expanded polystyrene), Fire behaviour building material class B1 in accordance with DIN 4102 - 1, Bulk density of 20 kg/qm Fire protection class E in accordance with EN 13 50 - 1, Dimensions: 600 x 600 x 70 mm, Colour: White, Package quantity: 4 pieces@+*Note:* For mounting, please use contact adhesive - Article Nr. #481723# (not included)@+@+, Thomann Hand-Kartuschenpistole@+*Hand sealant gun*, For t.akustik acoustic glue in 310 ml cartridges (not included, must be ordered separately), Hexagonal plunger rod, Red lacquer finish, 12x t.akustik Contact Glue@+*Acoustic Adhesive*, For acoustic convoluted, pyramids and basotect, Solvent-free, Elastoplastic, Single-component special polymer adhesive, Fast-curing and more universal than structural and assembly adhesives, Especially for the punctual and all-over adhesion of soundproofing and acoustic elements made of foam in particular melamine and polyurethane foam, Adheres to customary construction substrates such as concrete, plaster, masonry, cement and wood, 310 ml/ 490 g Cartridge, For 0.5 m² to 3 m² depending on the substrate and adhesive technology (punctual/ all-over), Note: Working temperature + 5° C to + 50° C, Storage: Cool and dry at + 5° C to + 25° C, Skin building time: 10 - 15...
Top Pick
t.akustik Producer Set S Premium
42487.5 NOK
t.akustik Producer Set S Premium@+*Bundle offer comprising*, 5x t.akustik Highline A1 Silver Spruce@+*Absorber Set*, Optimises room acoustics, Main frequency range: approx. 400 to 3150 Hz, Material: Polyester acoustic foam, Flame retardant in accordance with FMVSS 302; Burning rate: < 100 mm/min, Dimensions per absorber panel (W x D x H): 600 x 600 x 70 mm, Colour: Anthracite / Silver Spruce, Set contents: 6 Absorber panels, 8x t.akustik Diffusor Manhattan GR eps set@+*Diffuser Acoustic Elements*, Made of hardened EPS foam, For optimising room reflections and room sound, Suitable for recording studios, radio stations, home recording, and hi-fi rooms, Effective range: Approx. 900 - 3,250 Hz, Easy assembly and disassembly, Dimensions: 600 x 600 x 150 mm, Box contains 2 units as a kit including assembly instructions, One kit consists of 13 single elements, Colour: Graphite@+*Note:* Acoustic adhesive is recommended for preparation and attaching -- Article Nr. #481723# (not included), 12x t.akustik Highline CBT1 Silver Spruce@+*Corner Bass Traps*, Absorber for optimizing room acoustics, Especially suitable for the absorption of low-frequency sound waves, Material: Polyester acoustic foam, Main frequency / effective range 80 to 1000 Hz, Flame-retardant according to FMVSS 302 Burn rate <100 mm / min, Dimensions: 370 x 370 x 600 mm, Colour: Anthracite / silver spruce, Shipping quantity: 2 Pieces, Thomann Hand-Kartuschenpistole@+*Hand sealant gun*, For t.akustik acoustic glue in 310 ml cartridges (not included, must be ordered separately), Hexagonal plunger rod, Red lacquer finish, 13x t.akustik Contact Glue@+*Acoustic Adhesive*, For acoustic convoluted, pyramids and basotect, Solvent-free, Elastoplastic, Single-component special polymer adhesive, Fast-curing and more universal than structural and assembly adhesives, Especially for the punctual and all-over adhesion of soundproofing and acoustic elements made of foam in particular melamine and polyurethane foam, Adheres to customary construction substrates such as concrete, plaster, masonry, cement and wood, 310 ml/ 490 g Cartridge, For 0.5 m² to 3 m² depending on the substrate and adhesive technology (punctual/ all-over), Note: Working temperature + 5° C to + 50° C, Storage: Cool and dry at + 5° C to + 25° C, Skin building time: 10 - 15 min, Colour: White, Consistency: Pasty, Base: Polymer dispersion, Spec. mass: Approx. 1.58 g/cm, Protect from frost and heat, Suitable hand-held cartridge gun: Article Nr. #417630# (not included), New follow-up product: Article Nr. #481723# (not included)
Utmerket
t.akustik Office Set Open Plan 8 BK
38487.5 NOK
t.akustik Office Set Open Plan 8 BK@+*Bundle offer comprising*, 4x t.akustik PET Ceiling Absorber 180 BK@+*Ceiling Absorbers For Acoustic Room Optimisation*, Ideal for sound studios, home studios, podcast and streaming rooms, rehearsal rooms, hi-fi and home cinema applications, offices and call centres, Effective range: from 315 Hz, Material: PET fleece, 50 mm thick (tolerance of +/- 10%), Density: approx. 50 kg/m3, Absorption NRC = 0.95, PET flame retardant Building material class B-s1, d0 according to DIN EN 13501-1 / Building material class B1 according to DIN 4102-1, Very suitable for high-humidity environments, Suspension system: 4 adjustable stainless steel cables (each approx. 1 m) and 4 hooks, The wall plugs are embedded in the absorber plate, Dimensions (H x W x D): 1800 x 1200 x 50 mm, Panel thickness: 50 mm, Weight: 6.2 kg, Colour: Black, Quantity: 1 piece, 8x t.akustik Absorber Plate flex 140 BK@+*Absorber*, For acoustic optimisation and spatial separation, Can be used universally as a table, wall, ceiling or free-standing absorber by means of various optional brackets, Ideal for offices, call centres, podcast and streaming rooms as well as sound studios and home studios, Effective range: from 630 Hz, Material: PET fleece, 40 mm thick (tolerance of +/- 10%), Volume weight approx. 75 kg/m3, Absorption NRC = 0.95, Flame retardant according to Euroclass B S1-d0, Very suitable for environments with high humidity, Consisting of 1x acoustic panel (PET, colour black), 2x stand (PET, colour black), Further optionally brackets for different types of applications available, Panel thickness: 40 mm, Dimensions (W x H x D): 1400 x 600 x 40 mm, 4x t.akustik PET Wall Absorber 120 BK@+*Wall Absorber Set*, Suitable for acoustic room optimisation, Ideal for sound studios, home studios, podcast and streaming rooms, rehearsal rooms, hi-fi and home cinema applications, offices and call centers, Effective range: from 315 Hz, Material: PET fleece, 50 mm thick (tolerance of +/- 10%), Volume weight: approx. 50 kg/m3, Absorption NRC = 0.95, PET flame retardant Building material class B-s1, d0 according to DIN EN 13501-1 / Building material class B1 according to DIN 4102-1, Very suitable for high-humidity environments, Easy to hang up due to the recess L-hooks on the back (included in the delivery), Set includes: 2 modules, Panel thickness: 50 mm, Dimensions per module (W x H x D): 1200 x 600 x 50 mm, Weight per module: 1.85 kg, Colour: Black, 8x t.akustik PET Table Holder M1 BK@+*Table Mount*, For t.akustik Absorber Plate flex 140, Locking screw for fixing the bracket to a table top up to max. 38 mm, PET plate is positioned on the table top, Material: Metal, Dimensions (W x H x D): approx. 50 x 100 x 38 mm, Colour: Black, Quantity: 1 piece
Anbefalt
t.akustik PET Ceiling Absorber 180 SGR
3643.75 NOK
t.akustik PET Ceiling Absorber 180 SGR, Ceiling Absorber For Room Acoustic Optimisation, It is ideal for sound studios, home studios, podcast and streaming rooms, rehearsal rooms, hi-fi and home cinema applications, offices and call centres, Effective range: from 315 Hz, Material: PET fleece, 50 mm thick (tolerance of +/- 10%), Density: approx. 50kg/m3, Absorption NRC = 0.95, PET flame retardant Building material class B-s1, d0 according to DIN EN 13501-1 / Building material class B1 according to DIN 4102-1, Very suitable for high-humidity environments, Suspension system: 4 adjustable stainless steel cables approx.1 m and 4 hooks, The wall plugs are embedded in the absorber plate, Dimensions (H x W x D): 1800 x 1200 x 50 mm, Panel thickness: 50 mm, Weight: 6.2 kg, Colour: Silver-Grey, Quantity: 1 piece
Fremhevet
t.akustik Highline A1 Silver Spruce
3810 NOK
t.akustik Highline A1 Silver Spruce, Absorber Set, Optimises room acoustics, Main frequency range: approx. 400 to 3150 Hz, Material: Polyester acoustic foam, Flame retardant in accordance with FMVSS 302; Burning rate: < 100 mm/min, Dimensions per absorber panel (W x D x H): 600 x 600 x 70 mm, Colour: Anthracite / Silver Spruce, Set contents: 6 Absorber panels
Alternativ
t.akustik PET Wall Absorber 120 SGR
2072.5 NOK
t.akustik PET Wall Absorber 120 SGR, Wall Absorber Set, Suitable for room acoustic optimisation, It is ideal for sound studios, home studios, podcast and streaming rooms, rehearsal rooms, hi-fi and home cinema applications, offices and call centres, Effective range: from 315 Hz, Material: PET fleece, 50 mm thick (tolerance of +/- 10%), Density: approx. 50 kg/m3, Absorption NRC = 0.95, PET flame retardant Building material class B-s1, d0 according to DIN EN 13501-1 / Building material class B1 according to DIN 4102-1, Very suitable for high-humidity environments, Easy to hang up via L-hooks recessed on the back (included in the delivery), Set includes 2 modules, Panel thickness: 50 mm, Dimensions per module (W x H x D): 1200 x 600 x 50 mm, Weight per module: 1.85 kg, Colour: Silver Grey
t.akustik Office Set Open Plan 16 BK
78875 NOK
t.akustik Office Set Open Plan 16 BK@+*Bundle offer comprising*, 8x t.akustik PET Ceiling Absorber 180 BK@+*Ceiling Absorbers For Acoustic Room Optimisation*, Ideal for sound studios, home studios, podcast and streaming rooms, rehearsal rooms, hi-fi and home cinema applications, offices and call centres, Effective range: from 315 Hz, Material: PET fleece, 50 mm thick (tolerance of +/- 10%), Density: approx. 50 kg/m3, Absorption NRC = 0.95, PET flame retardant Building material class B-s1, d0 according to DIN EN 13501-1 / Building material class B1 according to DIN 4102-1, Very suitable for high-humidity environments, Suspension system: 4 adjustable stainless steel cables (each approx. 1 m) and 4 hooks, The wall plugs are embedded in the absorber plate, Dimensions (H x W x D): 1800 x 1200 x 50 mm, Panel thickness: 50 mm, Weight: 6.2 kg, Colour: Black, Quantity: 1 piece, 16x t.akustik Absorber Plate flex 140 BK@+*Absorber*, For acoustic optimisation and spatial separation, Can be used universally as a table, wall, ceiling or free-standing absorber by means of various optional brackets, Ideal for offices, call centres, podcast and streaming rooms as well as sound studios and home studios, Effective range: from 630 Hz, Material: PET fleece, 40 mm thick (tolerance of +/- 10%), Volume weight approx. 75 kg/m3, Absorption NRC = 0.95, Flame retardant according to Euroclass B S1-d0, Very suitable for environments with high humidity, Consisting of 1x acoustic panel (PET, colour black), 2x stand (PET, colour black), Further optionally brackets for different types of applications available, Panel thickness: 40 mm, Dimensions (W x H x D): 1400 x 600 x 40 mm, 8x t.akustik PET Wall Absorber 120 BK@+*Wall Absorber Set*, Suitable for acoustic room optimisation, Ideal for sound studios, home studios, podcast and streaming rooms, rehearsal rooms, hi-fi and home cinema applications, offices and call centers, Effective range: from 315 Hz, Material: PET fleece, 50 mm thick (tolerance of +/- 10%), Volume weight: approx. 50 kg/m3, Absorption NRC = 0.95, PET flame retardant Building material class B-s1, d0 according to DIN EN 13501-1 / Building material class B1 according to DIN 4102-1, Very suitable for high-humidity environments, Easy to hang up due to the recess L-hooks on the back (included in the delivery), Set includes: 2 modules, Panel thickness: 50 mm, Dimensions per module (W x H x D): 1200 x 600 x 50 mm, Weight per module: 1.85 kg, Colour: Black, 16x t.akustik PET Table Holder M1 BK@+*Table Mount*, For t.akustik Absorber Plate flex 140, Locking screw for fixing the bracket to a table top up to max. 38 mm, PET plate is positioned on the table top, Material: Metal, Dimensions (W x H x D): approx. 50 x 100 x 38 mm, Colour: Black, Quantity: 1 piece
t.akustik PET Wall Absorber 120 S Bundle
3187.5 NOK
t.akustik PET Wall Absorber 120 S Bundle@+*Bundle offer comprising*, t.akustik PET Wall Absorber 120 SGR@+*Wall Absorber Set*, Suitable for room acoustic optimisation, It is ideal for sound studios, home studios, podcast and streaming rooms, rehearsal rooms, hi-fi and home cinema applications, offices and call centres, Effective range: from 315 Hz, Material: PET fleece, 50 mm thick (tolerance of +/- 10%), Density: approx. 50 kg/m3, Absorption NRC = 0.95, PET flame retardant Building material class B-s1, d0 according to DIN EN 13501-1 / Building material class B1 according to DIN 4102-1, Very suitable for high-humidity environments, Easy to hang up via L-hooks recessed on the back (included in the delivery), Set includes 2 modules, Panel thickness: 50 mm, Dimensions per module (W x H x D): 1200 x 600 x 50 mm, Weight per module: 1.85 kg, Colour: Silver Grey, 2x t.akustik Wallmount Adapter MK2 100 BK@+*Spacer / Wall Mount Adapter*, For t.akustik PET Wall Absorber 120, Enables the installation of a PET Wall Absorber 120 at a distance of 100 mm from the wall (measured from the rear of the absorber) to optimise the acoustic properties of the absorber, The resulting air gap between the wall and absorber improves the absorption value of low frequencies, Mounting materials such as dowels, screws and washers are not included, Material: PLA (sustainable, made from renewable raw materials), Colour: Matt Black, Price per pair
t.akustik Rehearsal Room Set S Advanced
11123.75 NOK
t.akustik Rehearsal Room Set S Advanced@+*Bundle offer comprising*, t.akustik WAS-7 Melamine GR@+*Set of Absorber Panels*, Absorber for optimising room acoustics, Absorber type: Tips, The precisely cut panels allow different t.akustik models (e.g. WAW-7) to be combined and joined together, The absorption capacity has been optimised through a special design, The correct use of absorbers reduces flutter echoes, optimises room acoustics and gives the room a professional atmosphere, Effective range: From approx. 800 Hz, Material: Melamine resin foam, Fire behaviour according to EN13501-1, Euroclass C s2,d0 flame retardant, Sound absorption coefficient: >0.9 from approx. 600 Hz, Dimensions (L x W x H) : 600 x 70 x 70 mm, Colour: Grey, Set of eight individual absorber panels, Suitable glue: Art. #481723# (not included), t.akustik WDS-7 Diffuser Set 8pcs@+*Diffuser*, Set of 8, For the optimization of room acoustic, Sound radiation behavior is optimized by a special design, Used properly, the diffuser optimises room acoustics and ensures professional atmosphere to your studio, Lightweight diffuser is easy, non expensive and comfortable to install, Can be painted with water-based paints (must not contain solvents!), Bulk density: 20 kg/qm, Fire behavior Building material class B1 according to DIN 4102 - 1, Fire class E according to EN 13 50-1, Material: EPS (Expanded Polystyrene), Colour: White, Dimensions: 600 x 600 x 70 mm, Set includes 8 pieces, For mounting and fixing acoustic adhesive is recommended: Article Nr. #177265#, 6x t.akustik CBT-37 Melamine GR@+*Absorber Plate Set*, Absorber for optimising acoustics, Especially suitable for the absorption of low frequency sound waves, Material: Melamine resin foam, Fire behaviour in accordance with EN13501-1, Euroclass B - s1, d0 flame retardant, Sound absorption coefficient: > 0.9 from approx. 600 Hz, Dimensions (L x W x H): 370 x 370 x 600 mm, Colour: Grey, Set contains 2 individual pieces, Thomann Hand-Kartuschenpistole@+*Hand sealant gun*, For t.akustik acoustic glue in 310 ml cartridges (not included, must be ordered separately), Hexagonal plunger rod, Red lacquer finish, 5x t.akustik Contact Glue@+*Acoustic Adhesive*, For acoustic convoluted, pyramids and basotect, Solvent-free, Elastoplastic, Single-component special polymer adhesive, Fast-curing and more universal than structural and assembly adhesives, Especially for the punctual and all-over adhesion of soundproofing and acoustic elements made of foam in particular melamine and polyurethane foam, Adheres to customary construction substrates such as concrete, plaster, masonry, cement and wood, 310 ml/ 490 g Cartridge, For 0.5 m² to 3 m² depending on the substrate and adhesive technology (punctual/ all-over), Note: Working temperature + 5° C to + 50° C, Storage: Cool and dry at + 5° C to + 25° C, Skin building time: 10 - 15 min, Colour: White, Consistency: Pasty, Base: Polymer dispersion, Spec. mass: Approx. 1.58 g/cm, Protect from frost and heat,...
t.akustik Melamine Wedges 30 Gray
972.5 NOK
t.akustik Melamine Wedges 30 GR, Set of Absorbers, Material: Melamine resin foam, Fire behaviour according to EN 13501-1: C s2,d0, DIN 4102-1: B1 flame retardant, Sound absorption coefficient: >0.9 from approx. 600 Hz, Absorber dimensions: 300 x 300 x 50 mm, Base: 20 mm, Nub: 30 mm, Colour: Grey, Set contents: 16 individual absorbers, Suitable glue: Art. #481723# (not included)
t.akustik CBT-37 Melamine gray
1437.5 NOK
t.akustik CBT-37 Melamine GR, Absorber Plate Set, Absorber for optimising acoustics, Especially suitable for the absorption of low frequency sound waves, Material: Melamine resin foam, Fire behaviour in accordance with EN13501-1, Euroclass B - s1, d0 flame retardant, Sound absorption coefficient: > 0.9 from approx. 600 Hz, Dimensions (L x W x H): 370 x 370 x 600 mm, Colour: Grey, Set contains 2 individual pieces
t.akustik Highline A1 Silver Spruce
2543.75 NOK
t.akustik Highline A1 Silver Spruce, Absorber Set, Optimises room acoustics, Main frequency range: approx. 400 to 3150 Hz, Material: Polyester acoustic foam, Flame retardant in accordance with FMVSS 302, Burning rate: < 100 mm/min, Dimensions per absorber panel (W x D x H): 600 x 600 x 70 mm, Colour: Anthracite/Silver Spruce, Set content: 4 Absorber panels
t.akustik Rehearsal Room Set XL Advanced
34987.5 NOK
t.akustik Rehearsal Room Set XL Advanced@+*Bundle offer comprising*, 4x t.akustik WAS-7 Melamine GR@+*Set of Absorber Panels*, Absorber for optimising room acoustics, Absorber type: Tips, The precisely cut panels allow different t.akustik models (e.g. WAW-7) to be combined and joined together, The absorption capacity has been optimised through a special design, The correct use of absorbers reduces flutter echoes, optimises room acoustics and gives the room a professional atmosphere, Effective range: From approx. 800 Hz, Material: Melamine resin foam, Fire behaviour according to EN13501-1, Euroclass C s2,d0 flame retardant, Sound absorption coefficient: >0.9 from approx. 600 Hz, Dimensions (L x W x H) : 600 x 70 x 70 mm, Colour: Grey, Set of eight individual absorber panels, Suitable glue: Art. #481723# (not included), 3x t.akustik WDS-7 Diffuser Set 8pcs@+*Diffuser*, Set of 8, For the optimization of room acoustic, Sound radiation behavior is optimized by a special design, Used properly, the diffuser optimises room acoustics and ensures professional atmosphere to your studio, Lightweight diffuser is easy, non expensive and comfortable to install, Can be painted with water-based paints (must not contain solvents!), Bulk density: 20 kg/qm, Fire behavior Building material class B1 according to DIN 4102 - 1, Fire class E according to EN 13 50-1, Material: EPS (Expanded Polystyrene), Colour: White, Dimensions: 600 x 600 x 70 mm, Set includes 8 pieces, For mounting and fixing acoustic adhesive is recommended: Article Nr. #177265#, 18x t.akustik CBT-37 Melamine GR@+*Absorber Plate Set*, Absorber for optimising acoustics, Especially suitable for the absorption of low frequency sound waves, Material: Melamine resin foam, Fire behaviour in accordance with EN13501-1, Euroclass B - s1, d0 flame retardant, Sound absorption coefficient: > 0.9 from approx. 600 Hz, Dimensions (L x W x H): 370 x 370 x 600 mm, Colour: Grey, Set contains 2 individual pieces, Thomann Hand-Kartuschenpistole@+*Hand sealant gun*, For t.akustik acoustic glue in 310 ml cartridges (not included, must be ordered separately), Hexagonal plunger rod, Red lacquer finish, 18x t.akustik Contact Glue@+*Acoustic Adhesive*, For acoustic convoluted, pyramids and basotect, Solvent-free, Elastoplastic, Single-component special polymer adhesive, Fast-curing and more universal than structural and assembly adhesives, Especially for the punctual and all-over adhesion of soundproofing and acoustic elements made of foam in particular melamine and polyurethane foam, Adheres to customary construction substrates such as concrete, plaster, masonry, cement and wood, 310 ml/ 490 g Cartridge, For 0.5 m² to 3 m² depending on the substrate and adhesive technology (punctual/ all-over), Note: Working temperature + 5° C to + 50° C, Storage: Cool and dry at + 5° C to + 25° C, Skin building time: 10 - 15 min, Colour: White, Consistency: Pasty, Base: Polymer dispersion, Spec. mass: Approx. 1.58 g/cm, Protect from frost...
t.akustik Producer Set S Advanced
17487.5 NOK
t.akustik Producer Set S Advanced@+*Bundle offer comprising*, 2x t.akustik WAS-7 Melamine GR@+*Set of Absorber Panels*, Absorber for optimising room acoustics, Absorber type: Tips, The precisely cut panels allow different t.akustik models (e.g. WAW-7) to be combined and joined together, The absorption capacity has been optimised through a special design, The correct use of absorbers reduces flutter echoes, optimises room acoustics and gives the room a professional atmosphere, Effective range: From approx. 800 Hz, Material: Melamine resin foam, Fire behaviour according to EN13501-1, Euroclass C s2,d0 flame retardant, Sound absorption coefficient: >0.9 from approx. 600 Hz, Dimensions (L x W x H) : 600 x 70 x 70 mm, Colour: Grey, Set of eight individual absorber panels, Suitable glue: Art. #481723# (not included), t.akustik WDS-7 Diffuser Set 8pcs@+*Diffuser*, Set of 8, For the optimization of room acoustic, Sound radiation behavior is optimized by a special design, Used properly, the diffuser optimises room acoustics and ensures professional atmosphere to your studio, Lightweight diffuser is easy, non expensive and comfortable to install, Can be painted with water-based paints (must not contain solvents!), Bulk density: 20 kg/qm, Fire behavior Building material class B1 according to DIN 4102 - 1, Fire class E according to EN 13 50-1, Material: EPS (Expanded Polystyrene), Colour: White, Dimensions: 600 x 600 x 70 mm, Set includes 8 pieces, For mounting and fixing acoustic adhesive is recommended: Article Nr. #177265#, 10x t.akustik CBT-37 Melamine GR@+*Absorber Plate Set*, Absorber for optimising acoustics, Especially suitable for the absorption of low frequency sound waves, Material: Melamine resin foam, Fire behaviour in accordance with EN13501-1, Euroclass B - s1, d0 flame retardant, Sound absorption coefficient: > 0.9 from approx. 600 Hz, Dimensions (L x W x H): 370 x 370 x 600 mm, Colour: Grey, Set contains 2 individual pieces, Thomann Hand-Kartuschenpistole@+*Hand sealant gun*, For t.akustik acoustic glue in 310 ml cartridges (not included, must be ordered separately), Hexagonal plunger rod, Red lacquer finish, 8x t.akustik Contact Glue@+*Acoustic Adhesive*, For acoustic convoluted, pyramids and basotect, Solvent-free, Elastoplastic, Single-component special polymer adhesive, Fast-curing and more universal than structural and assembly adhesives, Especially for the punctual and all-over adhesion of soundproofing and acoustic elements made of foam in particular melamine and polyurethane foam, Adheres to customary construction substrates such as concrete, plaster, masonry, cement and wood, 310 ml/ 490 g Cartridge, For 0.5 m² to 3 m² depending on the substrate and adhesive technology (punctual/ all-over), Note: Working temperature + 5° C to + 50° C, Storage: Cool and dry at + 5° C to + 25° C, Skin building time: 10 - 15 min, Colour: White, Consistency: Pasty, Base: Polymer dispersion, Spec. mass: Approx. 1.58 g/cm, Protect from frost and heat,...
t.akustik Office Set Open Plan BK
18862.5 NOK
t.akustik Office Set Open Plan BK@+*Bundle offer comprising*, 2x t.akustik PET Ceiling Absorber 180 BK@+*Ceiling Absorbers For Acoustic Room Optimisation*, Ideal for sound studios, home studios, podcast and streaming rooms, rehearsal rooms, hi-fi and home cinema applications, offices and call centres, Effective range: from 315 Hz, Material: PET fleece, 50 mm thick (tolerance of +/- 10%), Density: approx. 50 kg/m3, Absorption NRC = 0.95, PET flame retardant Building material class B-s1, d0 according to DIN EN 13501-1 / Building material class B1 according to DIN 4102-1, Very suitable for high-humidity environments, Suspension system: 4 adjustable stainless steel cables (each approx. 1 m) and 4 hooks, The wall plugs are embedded in the absorber plate, Dimensions (H x W x D): 1800 x 1200 x 50 mm, Panel thickness: 50 mm, Weight: 6.2 kg, Colour: Black, Quantity: 1 piece, 4x t.akustik Absorber Plate flex 140 BK@+*Absorber*, For acoustic optimisation and spatial separation, Can be used universally as a table, wall, ceiling or free-standing absorber by means of various optional brackets, Ideal for offices, call centres, podcast and streaming rooms as well as sound studios and home studios, Effective range: from 630 Hz, Material: PET fleece, 40 mm thick (tolerance of +/- 10%), Volume weight approx. 75 kg/m3, Absorption NRC = 0.95, Flame retardant according to Euroclass B S1-d0, Very suitable for environments with high humidity, Consisting of 1x acoustic panel (PET, colour black), 2x stand (PET, colour black), Further optionally brackets for different types of applications available, Panel thickness: 40 mm, Dimensions (W x H x D): 1400 x 600 x 40 mm, 2x t.akustik PET Wall Absorber 120 BK@+*Wall Absorber Set*, Suitable for acoustic room optimisation, Ideal for sound studios, home studios, podcast and streaming rooms, rehearsal rooms, hi-fi and home cinema applications, offices and call centers, Effective range: from 315 Hz, Material: PET fleece, 50 mm thick (tolerance of +/- 10%), Volume weight: approx. 50 kg/m3, Absorption NRC = 0.95, PET flame retardant Building material class B-s1, d0 according to DIN EN 13501-1 / Building material class B1 according to DIN 4102-1, Very suitable for high-humidity environments, Easy to hang up due to the recess L-hooks on the back (included in the delivery), Set includes: 2 modules, Panel thickness: 50 mm, Dimensions per module (W x H x D): 1200 x 600 x 50 mm, Weight per module: 1.85 kg, Colour: Black, 4x t.akustik PET Table Holder M1 BK@+*Table Mount*, For t.akustik Absorber Plate flex 140, Locking screw for fixing the bracket to a table top up to max. 38 mm, PET plate is positioned on the table top, Material: Metal, Dimensions (W x H x D): approx. 50 x 100 x 38 mm, Colour: Black, Quantity: 1 piece
t.akustik Office Set Open Plan 12 BK
58362.5 NOK
t.akustik Office Set Open Plan 12 BK@+*Bundle offer comprising*, 6x t.akustik PET Ceiling Absorber 180 BK@+*Ceiling Absorbers For Acoustic Room Optimisation*, Ideal for sound studios, home studios, podcast and streaming rooms, rehearsal rooms, hi-fi and home cinema applications, offices and call centres, Effective range: from 315 Hz, Material: PET fleece, 50 mm thick (tolerance of +/- 10%), Density: approx. 50 kg/m3, Absorption NRC = 0.95, PET flame retardant Building material class B-s1, d0 according to DIN EN 13501-1 / Building material class B1 according to DIN 4102-1, Very suitable for high-humidity environments, Suspension system: 4 adjustable stainless steel cables (each approx. 1 m) and 4 hooks, The wall plugs are embedded in the absorber plate, Dimensions (H x W x D): 1800 x 1200 x 50 mm, Panel thickness: 50 mm, Weight: 6.2 kg, Colour: Black, Quantity: 1 piece, 12x t.akustik Absorber Plate flex 140 BK@+*Absorber*, For acoustic optimisation and spatial separation, Can be used universally as a table, wall, ceiling or free-standing absorber by means of various optional brackets, Ideal for offices, call centres, podcast and streaming rooms as well as sound studios and home studios, Effective range: from 630 Hz, Material: PET fleece, 40 mm thick (tolerance of +/- 10%), Volume weight approx. 75 kg/m3, Absorption NRC = 0.95, Flame retardant according to Euroclass B S1-d0, Very suitable for environments with high humidity, Consisting of 1x acoustic panel (PET, colour black), 2x stand (PET, colour black), Further optionally brackets for different types of applications available, Panel thickness: 40 mm, Dimensions (W x H x D): 1400 x 600 x 40 mm, 6x t.akustik PET Wall Absorber 120 BK@+*Wall Absorber Set*, Suitable for acoustic room optimisation, Ideal for sound studios, home studios, podcast and streaming rooms, rehearsal rooms, hi-fi and home cinema applications, offices and call centers, Effective range: from 315 Hz, Material: PET fleece, 50 mm thick (tolerance of +/- 10%), Volume weight: approx. 50 kg/m3, Absorption NRC = 0.95, PET flame retardant Building material class B-s1, d0 according to DIN EN 13501-1 / Building material class B1 according to DIN 4102-1, Very suitable for high-humidity environments, Easy to hang up due to the recess L-hooks on the back (included in the delivery), Set includes: 2 modules, Panel thickness: 50 mm, Dimensions per module (W x H x D): 1200 x 600 x 50 mm, Weight per module: 1.85 kg, Colour: Black, 12x t.akustik PET Table Holder M1 BK@+*Table Mount*, For t.akustik Absorber Plate flex 140, Locking screw for fixing the bracket to a table top up to max. 38 mm, PET plate is positioned on the table top, Material: Metal, Dimensions (W x H x D): approx. 50 x 100 x 38 mm, Colour: Black, Quantity: 1 piece
t.akustik Rehearsal Room Set M Advanced
17487.5 NOK
t.akustik Rehearsal Room Set M Advanced@+*Bundle offer comprising*, 2x t.akustik WAS-7 Melamine GR@+*Set of Absorber Panels*, Absorber for optimising room acoustics, Absorber type: Tips, The precisely cut panels allow different t.akustik models (e.g. WAW-7) to be combined and joined together, The absorption capacity has been optimised through a special design, The correct use of absorbers reduces flutter echoes, optimises room acoustics and gives the room a professional atmosphere, Effective range: From approx. 800 Hz, Material: Melamine resin foam, Fire behaviour according to EN13501-1, Euroclass C s2,d0 flame retardant, Sound absorption coefficient: >0.9 from approx. 600 Hz, Dimensions (L x W x H) : 600 x 70 x 70 mm, Colour: Grey, Set of eight individual absorber panels, Suitable glue: Art. #481723# (not included), t.akustik WDS-7 Diffuser Set 8pcs@+*Diffuser*, Set of 8, For the optimization of room acoustic, Sound radiation behavior is optimized by a special design, Used properly, the diffuser optimises room acoustics and ensures professional atmosphere to your studio, Lightweight diffuser is easy, non expensive and comfortable to install, Can be painted with water-based paints (must not contain solvents!), Bulk density: 20 kg/qm, Fire behavior Building material class B1 according to DIN 4102 - 1, Fire class E according to EN 13 50-1, Material: EPS (Expanded Polystyrene), Colour: White, Dimensions: 600 x 600 x 70 mm, Set includes 8 pieces, For mounting and fixing acoustic adhesive is recommended: Article Nr. #177265#, 10x t.akustik CBT-37 Melamine GR@+*Absorber Plate Set*, Absorber for optimising acoustics, Especially suitable for the absorption of low frequency sound waves, Material: Melamine resin foam, Fire behaviour in accordance with EN13501-1, Euroclass B - s1, d0 flame retardant, Sound absorption coefficient: > 0.9 from approx. 600 Hz, Dimensions (L x W x H): 370 x 370 x 600 mm, Colour: Grey, Set contains 2 individual pieces, Thomann Hand-Kartuschenpistole@+*Hand sealant gun*, For t.akustik acoustic glue in 310 ml cartridges (not included, must be ordered separately), Hexagonal plunger rod, Red lacquer finish, 10x t.akustik Contact Glue@+*Acoustic Adhesive*, For acoustic convoluted, pyramids and basotect, Solvent-free, Elastoplastic, Single-component special polymer adhesive, Fast-curing and more universal than structural and assembly adhesives, Especially for the punctual and all-over adhesion of soundproofing and acoustic elements made of foam in particular melamine and polyurethane foam, Adheres to customary construction substrates such as concrete, plaster, masonry, cement and wood, 310 ml/ 490 g Cartridge, For 0.5 m² to 3 m² depending on the substrate and adhesive technology (punctual/ all-over), Note: Working temperature + 5° C to + 50° C, Storage: Cool and dry at + 5° C to + 25° C, Skin building time: 10 - 15 min, Colour: White, Consistency: Pasty, Base: Polymer dispersion, Spec. mass: Approx. 1.58 g/cm, Protect from frost and...
t.akustik Producer Set M Premium
52737.5 NOK
t.akustik Producer Set M Premium@+*Bundle offer comprising*, 6x t.akustik Highline A1 Silver Spruce@+*Absorber Set*, Optimises room acoustics, Main frequency range: approx. 400 to 3150 Hz, Material: Polyester acoustic foam, Flame retardant in accordance with FMVSS 302; Burning rate: < 100 mm/min, Dimensions per absorber panel (W x D x H): 600 x 600 x 70 mm, Colour: Anthracite / Silver Spruce, Set contents: 6 Absorber panels, 10x t.akustik Diffusor Manhattan GR eps set@+*Diffuser Acoustic Elements*, Made of hardened EPS foam, For optimising room reflections and room sound, Suitable for recording studios, radio stations, home recording, and hi-fi rooms, Effective range: Approx. 900 - 3,250 Hz, Easy assembly and disassembly, Dimensions: 600 x 600 x 150 mm, Box contains 2 units as a kit including assembly instructions, One kit consists of 13 single elements, Colour: Graphite@+*Note:* Acoustic adhesive is recommended for preparation and attaching -- Article Nr. #481723# (not included), 16x t.akustik Highline CBT1 Silver Spruce@+*Corner Bass Traps*, Absorber for optimizing room acoustics, Especially suitable for the absorption of low-frequency sound waves, Material: Polyester acoustic foam, Main frequency / effective range 80 to 1000 Hz, Flame-retardant according to FMVSS 302 Burn rate <100 mm / min, Dimensions: 370 x 370 x 600 mm, Colour: Anthracite / silver spruce, Shipping quantity: 2 Pieces, Thomann Hand-Kartuschenpistole@+*Hand sealant gun*, For t.akustik acoustic glue in 310 ml cartridges (not included, must be ordered separately), Hexagonal plunger rod, Red lacquer finish, 16x t.akustik Contact Glue@+*Acoustic Adhesive*, For acoustic convoluted, pyramids and basotect, Solvent-free, Elastoplastic, Single-component special polymer adhesive, Fast-curing and more universal than structural and assembly adhesives, Especially for the punctual and all-over adhesion of soundproofing and acoustic elements made of foam in particular melamine and polyurethane foam, Adheres to customary construction substrates such as concrete, plaster, masonry, cement and wood, 310 ml/ 490 g Cartridge, For 0.5 m² to 3 m² depending on the substrate and adhesive technology (punctual/ all-over), Note: Working temperature + 5° C to + 50° C, Storage: Cool and dry at + 5° C to + 25° C, Skin building time: 10 - 15 min, Colour: White, Consistency: Pasty, Base: Polymer dispersion, Spec. mass: Approx. 1.58 g/cm, Protect from frost and heat, Suitable hand-held cartridge gun: Article Nr. #417630# (not included), New follow-up product: Article Nr. #481723# (not included)
Byggematerialer Thomannmusic.no Beste Produkter
t.akustik Producer Set L Premium
67750 NOK
t.akustik Producer Set L Premium@+*Bundle offer comprising*, 13x t.akustik Highline A1 Silver Spruce@+*Absorber Set*, Optimises room acoustics, Main frequency range: approx. 400 to 3150 Hz, Material: Polyester acoustic foam, Flame retardant in accordance with FMVSS 302, Burning rate: < 100 mm/min, Dimensions per absorber panel (W x D x H): 600 x 600 x 70 mm, Colour: Anthracite/Silver Spruce, Set content: 4 Absorber panels, 10x t.akustik Diffusor Manhattan GR eps set@+*Diffuser Acoustic Elements*, Made of hardened EPS foam, For optimising room reflections and room sound, Suitable for recording studios, radio stations, home recording, and hi-fi rooms, Effective range: Approx. 900 - 3,250 Hz, Easy assembly and disassembly, Dimensions: 600 x 600 x 150 mm, Box contains 2 units as a kit including assembly instructions, One kit consists of 13 single elements, Colour: Graphite@+*Note:* Acoustic adhesive is recommended for preparation and attaching -- Article Nr. #481723# (not included), 20x t.akustik Highline CBT1 Silver Spruce@+*Corner Bass Traps*, Absorber for optimizing room acoustics, Especially suitable for the absorption of low-frequency sound waves, Material: Polyester acoustic foam, Main frequency / effective range 80 to 1000 Hz, Flame-retardant according to FMVSS 302 Burn rate <100 mm / min, Dimensions: 370 x 370 x 600 mm, Colour: Anthracite / silver spruce, Shipping quantity: 2 Pieces, Thomann Hand-Kartuschenpistole@+*Hand sealant gun*, For t.akustik acoustic glue in 310 ml cartridges (not included, must be ordered separately), Hexagonal plunger rod, Red lacquer finish, 22x t.akustik Contact Glue@+*Acoustic Adhesive*, For acoustic convoluted, pyramids and basotect, Solvent-free, Elastoplastic, Single-component special polymer adhesive, Fast-curing and more universal than structural and assembly adhesives, Especially for the punctual and all-over adhesion of soundproofing and acoustic elements made of foam in particular melamine and polyurethane foam, Adheres to customary construction substrates such as concrete, plaster, masonry, cement and wood, 310 ml/ 490 g Cartridge, For 0.5 m² to 3 m² depending on the substrate and adhesive technology (punctual/ all-over), Note: Working temperature + 5° C to + 50° C, Storage: Cool and dry at + 5° C to + 25° C, Skin building time: 10 - 15 min, Colour: White, Consistency: Pasty, Base: Polymer dispersion, Spec. mass: Approx. 1.58 g/cm, Protect from frost and heat, Suitable hand-held cartridge gun: Article Nr. #417630# (not included), New follow-up product: Article Nr. #481723# (not included)
t.akustik Producer Set M Advanced
25362.5 NOK
t.akustik Producer Set M Advanced@+*Bundle offer comprising*, 3x t.akustik WAS-7 Melamine GR@+*Set of Absorber Panels*, Absorber for optimising room acoustics, Absorber type: Tips, The precisely cut panels allow different t.akustik models (e.g. WAW-7) to be combined and joined together, The absorption capacity has been optimised through a special design, The correct use of absorbers reduces flutter echoes, optimises room acoustics and gives the room a professional atmosphere, Effective range: From approx. 800 Hz, Material: Melamine resin foam, Fire behaviour according to EN13501-1, Euroclass C s2,d0 flame retardant, Sound absorption coefficient: >0.9 from approx. 600 Hz, Dimensions (L x W x H) : 600 x 70 x 70 mm, Colour: Grey, Set of eight individual absorber panels, Suitable glue: Art. #481723# (not included), 14x t.akustik CBT-37 Melamine GR@+*Absorber Plate Set*, Absorber for optimising acoustics, Especially suitable for the absorption of low frequency sound waves, Material: Melamine resin foam, Fire behaviour in accordance with EN13501-1, Euroclass B - s1, d0 flame retardant, Sound absorption coefficient: > 0.9 from approx. 600 Hz, Dimensions (L x W x H): 370 x 370 x 600 mm, Colour: Grey, Set contains 2 individual pieces, 3x t.akustik WDS-7 Diffuser Set 4pcs@+*Diffuser for Optimising Room Acoustics*, Diffuser profile: Stepped, The coverage pattern has been optimised by a special design, The correct use of the WDS-7 optimises the room acoustics and gives the room a professional atmosphere, Its light weight makes it inexpensive and easy to install, Can be painted or lacquered with water-based paints (use only paints without solvents!) and thus offers the possibility of free colour composition, Material: EPS (Expanded polystyrene), Fire behaviour building material class B1 in accordance with DIN 4102 - 1, Bulk density of 20 kg/qm Fire protection class E in accordance with EN 13 50 - 1, Dimensions: 600 x 600 x 70 mm, Colour: White, Package quantity: 4 pieces@+*Note:* For mounting, please use contact adhesive - Article Nr. #481723# (not included)@+@+, Thomann Hand-Kartuschenpistole@+*Hand sealant gun*, For t.akustik acoustic glue in 310 ml cartridges (not included, must be ordered separately), Hexagonal plunger rod, Red lacquer finish, 12x t.akustik Contact Glue@+*Acoustic Adhesive*, For acoustic convoluted, pyramids and basotect, Solvent-free, Elastoplastic, Single-component special polymer adhesive, Fast-curing and more universal than structural and assembly adhesives, Especially for the punctual and all-over adhesion of soundproofing and acoustic elements made of foam in particular melamine and polyurethane foam, Adheres to customary construction substrates such as concrete, plaster, masonry, cement and wood, 310 ml/ 490 g Cartridge, For 0.5 m² to 3 m² depending on the substrate and adhesive technology (punctual/ all-over), Note: Working temperature + 5° C to + 50° C, Storage: Cool and dry at + 5° C to + 25° C, Skin building time: 10 - 15 min,...
t.akustik Producer Set L Advanced
34987.5 NOK
t.akustik Producer Set L Advanced@+*Bundle offer comprising*, 4x t.akustik WAS-7 Melamine GR@+*Set of Absorber Panels*, Absorber for optimising room acoustics, Absorber type: Tips, The precisely cut panels allow different t.akustik models (e.g. WAW-7) to be combined and joined together, The absorption capacity has been optimised through a special design, The correct use of absorbers reduces flutter echoes, optimises room acoustics and gives the room a professional atmosphere, Effective range: From approx. 800 Hz, Material: Melamine resin foam, Fire behaviour according to EN13501-1, Euroclass C s2,d0 flame retardant, Sound absorption coefficient: >0.9 from approx. 600 Hz, Dimensions (L x W x H) : 600 x 70 x 70 mm, Colour: Grey, Set of eight individual absorber panels, Suitable glue: Art. #481723# (not included), 2x t.akustik WDS-7 Diffuser Set 8pcs@+*Diffuser*, Set of 8, For the optimization of room acoustic, Sound radiation behavior is optimized by a special design, Used properly, the diffuser optimises room acoustics and ensures professional atmosphere to your studio, Lightweight diffuser is easy, non expensive and comfortable to install, Can be painted with water-based paints (must not contain solvents!), Bulk density: 20 kg/qm, Fire behavior Building material class B1 according to DIN 4102 - 1, Fire class E according to EN 13 50-1, Material: EPS (Expanded Polystyrene), Colour: White, Dimensions: 600 x 600 x 70 mm, Set includes 8 pieces, For mounting and fixing acoustic adhesive is recommended: Article Nr. #177265#, 20x t.akustik CBT-37 Melamine GR@+*Absorber Plate Set*, Absorber for optimising acoustics, Especially suitable for the absorption of low frequency sound waves, Material: Melamine resin foam, Fire behaviour in accordance with EN13501-1, Euroclass B - s1, d0 flame retardant, Sound absorption coefficient: > 0.9 from approx. 600 Hz, Dimensions (L x W x H): 370 x 370 x 600 mm, Colour: Grey, Set contains 2 individual pieces, Thomann Hand-Kartuschenpistole@+*Hand sealant gun*, For t.akustik acoustic glue in 310 ml cartridges (not included, must be ordered separately), Hexagonal plunger rod, Red lacquer finish, 17x t.akustik Contact Glue@+*Acoustic Adhesive*, For acoustic convoluted, pyramids and basotect, Solvent-free, Elastoplastic, Single-component special polymer adhesive, Fast-curing and more universal than structural and assembly adhesives, Especially for the punctual and all-over adhesion of soundproofing and acoustic elements made of foam in particular melamine and polyurethane foam, Adheres to customary construction substrates such as concrete, plaster, masonry, cement and wood, 310 ml/ 490 g Cartridge, For 0.5 m² to 3 m² depending on the substrate and adhesive technology (punctual/ all-over), Note: Working temperature + 5° C to + 50° C, Storage: Cool and dry at + 5° C to + 25° C, Skin building time: 10 - 15 min, Colour: White, Consistency: Pasty, Base: Polymer dispersion, Spec. mass: Approx. 1.58 g/cm, Protect from frost and heat,...
t.akustik Producer Set XL Advanced
42987.5 NOK
t.akustik Producer Set XL Advanced@+*Bundle offer comprising*, 5x t.akustik WAS-7 Melamine GR@+*Set of Absorber Panels*, Absorber for optimising room acoustics, Absorber type: Tips, The precisely cut panels allow different t.akustik models (e.g. WAW-7) to be combined and joined together, The absorption capacity has been optimised through a special design, The correct use of absorbers reduces flutter echoes, optimises room acoustics and gives the room a professional atmosphere, Effective range: From approx. 800 Hz, Material: Melamine resin foam, Fire behaviour according to EN13501-1, Euroclass C s2,d0 flame retardant, Sound absorption coefficient: >0.9 from approx. 600 Hz, Dimensions (L x W x H) : 600 x 70 x 70 mm, Colour: Grey, Set of eight individual absorber panels, Suitable glue: Art. #481723# (not included), 24x t.akustik CBT-37 Melamine GR@+*Absorber Plate Set*, Absorber for optimising acoustics, Especially suitable for the absorption of low frequency sound waves, Material: Melamine resin foam, Fire behaviour in accordance with EN13501-1, Euroclass B - s1, d0 flame retardant, Sound absorption coefficient: > 0.9 from approx. 600 Hz, Dimensions (L x W x H): 370 x 370 x 600 mm, Colour: Grey, Set contains 2 individual pieces, 5x t.akustik WDS-7 GR Diffuser 4pcs Set@+*Diffuser for Optimising Room Acoustics*, Diffuser profile: Stepped, The coverage pattern has been optimised by a special design, The correct use of the WDS-7 optimises the room acoustics and gives the room a professional atmosphere, Its light weight makes it inexpensive and easy to install, Material: EPS (Expanded polystyrene), Fire behaviour building material class B1 in accordance with DIN 4102 - 1, Bulk density of 20 kg/qm Fire protection class E in accordance with EN 13 50 - 1, Dimensions: 600 x 600 x 70 mm, Colour: Graphite, Package quantity: 4 pieces@+*Note:* For mounting, please use contact adhesive - Article Nr. #481723# (not included)@+@+, Thomann Hand-Kartuschenpistole@+*Hand sealant gun*, For t.akustik acoustic glue in 310 ml cartridges (not included, must be ordered separately), Hexagonal plunger rod, Red lacquer finish, 21x t.akustik Contact Glue@+*Acoustic Adhesive*, For acoustic convoluted, pyramids and basotect, Solvent-free, Elastoplastic, Single-component special polymer adhesive, Fast-curing and more universal than structural and assembly adhesives, Especially for the punctual and all-over adhesion of soundproofing and acoustic elements made of foam in particular melamine and polyurethane foam, Adheres to customary construction substrates such as concrete, plaster, masonry, cement and wood, 310 ml/ 490 g Cartridge, For 0.5 m² to 3 m² depending on the substrate and adhesive technology (punctual/ all-over), Note: Working temperature + 5° C to + 50° C, Storage: Cool and dry at + 5° C to + 25° C, Skin building time: 10 - 15 min, Colour: White, Consistency: Pasty, Base: Polymer dispersion, Spec. mass: Approx. 1.58 g/cm, Protect from frost and heat, Suitable hand-held...
t.akustik Office Set Single SGR
7082.5 NOK
t.akustik Office Set Single SGR@+*Bundle offer comprising*, t.akustik PET Ceiling Absorber 180 SGR@+*Ceiling Absorber For Room Acoustic Optimisation*, It is ideal for sound studios, home studios, podcast and streaming rooms, rehearsal rooms, hi-fi and home cinema applications, offices and call centres, Effective range: from 315 Hz, Material: PET fleece, 50 mm thick (tolerance of +/- 10%), Density: approx. 50kg/m3, Absorption NRC = 0.95, PET flame retardant Building material class B-s1, d0 according to DIN EN 13501-1 / Building material class B1 according to DIN 4102-1, Very suitable for high-humidity environments, Suspension system: 4 adjustable stainless steel cables approx.1 m and 4 hooks, The wall plugs are embedded in the absorber plate, Dimensions (H x W x D): 1800 x 1200 x 50 mm, Panel thickness: 50 mm, Weight: 6.2 kg, Colour: Silver-Grey, Quantity: 1 piece, t.akustik PET Wall Absorber 60 SGR@+*Wall Absorber Set*, Suitable for room acoustic optimisation, It is ideal for sound studios, home studios, podcast and streaming rooms, rehearsal rooms, hi-fi and home cinema applications, offices and call centers, Effective range: from 315 Hz, Material: PET fleece, 50 mm thick (tolerance of +/- 10%), Density: approx. 50 kg/m3, Absorption NRC = 0.95, PET flame retardant Building material class B-s1, d0 according to DIN EN 13501-1 / Building material class B1 according to DIN 4102-1, Very suitable for high-humidity environments, Easy to hang up via L-hooks recessed on the back (included in the delivery), Set includes 4 modules, Panel thickness: 50 mm, Dimensions per module (W x H x D): 600 x 600 x 50 mm, Weight per module: 0.95 kg, Colour: Silver Grey, t.akustik PET Wall Absorber 120 SGR@+*Wall Absorber Set*, Suitable for room acoustic optimisation, It is ideal for sound studios, home studios, podcast and streaming rooms, rehearsal rooms, hi-fi and home cinema applications, offices and call centres, Effective range: from 315 Hz, Material: PET fleece, 50 mm thick (tolerance of +/- 10%), Density: approx. 50 kg/m3, Absorption NRC = 0.95, PET flame retardant Building material class B-s1, d0 according to DIN EN 13501-1 / Building material class B1 according to DIN 4102-1, Very suitable for high-humidity environments, Easy to hang up via L-hooks recessed on the back (included in the delivery), Set includes 2 modules, Panel thickness: 50 mm, Dimensions per module (W x H x D): 1200 x 600 x 50 mm, Weight per module: 1.85 kg, Colour: Silver Grey
t.akustik Absorber Plate flex 140 BK
2393.75 NOK
t.akustik Absorber Plate flex 140 BK, Absorber, For acoustic optimisation and spatial separation, Can be used universally as a table, wall, ceiling or free-standing absorber by means of various optional brackets, Ideal for offices, call centres, podcast and streaming rooms as well as sound studios and home studios, Effective range: from 630 Hz, Material: PET fleece, 40 mm thick (tolerance of +/- 10%), Volume weight approx. 75 kg/m3, Absorption NRC = 0.95, Flame retardant according to Euroclass B S1-d0, Very suitable for environments with high humidity, Consisting of 1x acoustic panel (PET, colour black), 2x stand (PET, colour black), Further optionally brackets for different types of applications available, Panel thickness: 40 mm, Dimensions (W x H x D): 1400 x 600 x 40 mm
Adam Hall 6105 Kantenschutz
261.25 NOK
Adam Hall 6105 Case Angle 30 x 30 mm, Aluminium Edge Protection, Size: 30 x 30 mm, Weight: 240 g/m, Length: 1.00 m@+*Note:* Delivery quantity 1 metre +/ - 5 mm
t.akustik Rehearsal Room Set L Prof.
72375 NOK
t.akustik Rehearsal Room Set L Prof.@+*Bundle offer comprising*, 14x t.akustik Highline CBT2 Birch Wood@+*Corner Bass Traps*, Absorber for optimising room acoustics, High-quality polyester acoustic foam with high density (40 kg/m³ net nominal weight +/- 5 kg tolerance) and dense structure especially for the absorption of low frequencies, Main effective range: 80 to 500 Hz, Material: Polyester acoustic foam, Flame-retardant in accordance with FMVSS 302 Burning rate <100 mm/min, Individually removable acoustic panels, Dimensions: 400 x 400 x 600 mm, Colour: Anthracite / Birch, Package quantity: 2 pieces, 20x t.akustik Spektrum A10 Absorber GR@+*Acoustic Absorber*, For medium and high frequencies, Efficiency rate: at 200 Hz approx. 50% absorption, complete absorption above 500 Hz, Effective range: from approx. 315 Hz, For optimising surround sound in recording studios, home theatres, and in home recording applications, Material: 12 mm birch plywood filled with mineral wool, Covered with grey fabric, Dimensions: 600 x 600 x 100 mm, Weight: 4.4 kg, Colour: grey, Includes 4 mounting clips for wall mounting (screws are not included, must be purchased separately), 4x t.akustik Diffusor Manhattan GR eps set@+*Diffuser Acoustic Elements*, Made of hardened EPS foam, For optimising room reflections and room sound, Suitable for recording studios, radio stations, home recording, and hi-fi rooms, Effective range: Approx. 900 - 3,250 Hz, Easy assembly and disassembly, Dimensions: 600 x 600 x 150 mm, Box contains 2 units as a kit including assembly instructions, One kit consists of 13 single elements, Colour: Graphite@+*Note:* Acoustic adhesive is recommended for preparation and attaching -- Article Nr. #481723# (not included), Thomann Hand-Kartuschenpistole@+*Hand sealant gun*, For t.akustik acoustic glue in 310 ml cartridges (not included, must be ordered separately), Hexagonal plunger rod, Red lacquer finish, 8x t.akustik Contact Glue@+*Acoustic Adhesive*, For acoustic convoluted, pyramids and basotect, Solvent-free, Elastoplastic, Single-component special polymer adhesive, Fast-curing and more universal than structural and assembly adhesives, Especially for the punctual and all-over adhesion of soundproofing and acoustic elements made of foam in particular melamine and polyurethane foam, Adheres to customary construction substrates such as concrete, plaster, masonry, cement and wood, 310 ml/ 490 g Cartridge, For 0.5 m² to 3 m² depending on the substrate and adhesive technology (punctual/ all-over), Note: Working temperature + 5° C to + 50° C, Storage: Cool and dry at + 5° C to + 25° C, Skin building time: 10 - 15 min, Colour: White, Consistency: Pasty, Base: Polymer dispersion, Spec. mass: Approx. 1.58 g/cm, Protect from frost and heat, Suitable hand-held cartridge gun: Article Nr. #417630# (not included), New follow-up product: Article Nr. #481723# (not included)
t.akustik Rehearsal Room Set L Premium
44112.5 NOK
t.akustik Rehearsal Room Set L Premium@+*Bundle offer comprising*, 4x t.akustik Highline A1 Silver Spruce@+*Absorber Set*, Optimises room acoustics, Main frequency range: approx. 400 to 3150 Hz, Material: Polyester acoustic foam, Flame retardant in accordance with FMVSS 302; Burning rate: < 100 mm/min, Dimensions per absorber panel (W x D x H): 600 x 600 x 70 mm, Colour: Anthracite / Silver Spruce, Set contents: 6 Absorber panels, 8x t.akustik Diffusor Manhattan GR eps set@+*Diffuser Acoustic Elements*, Made of hardened EPS foam, For optimising room reflections and room sound, Suitable for recording studios, radio stations, home recording, and hi-fi rooms, Effective range: Approx. 900 - 3,250 Hz, Easy assembly and disassembly, Dimensions: 600 x 600 x 150 mm, Box contains 2 units as a kit including assembly instructions, One kit consists of 13 single elements, Colour: Graphite@+*Note:* Acoustic adhesive is recommended for preparation and attaching -- Article Nr. #481723# (not included), 16x t.akustik Highline CBT1 Silver Spruce@+*Corner Bass Traps*, Absorber for optimizing room acoustics, Especially suitable for the absorption of low-frequency sound waves, Material: Polyester acoustic foam, Main frequency / effective range 80 to 1000 Hz, Flame-retardant according to FMVSS 302 Burn rate <100 mm / min, Dimensions: 370 x 370 x 600 mm, Colour: Anthracite / silver spruce, Shipping quantity: 2 Pieces, Thomann Hand-Kartuschenpistole@+*Hand sealant gun*, For t.akustik acoustic glue in 310 ml cartridges (not included, must be ordered separately), Hexagonal plunger rod, Red lacquer finish, 14x t.akustik Contact Glue@+*Acoustic Adhesive*, For acoustic convoluted, pyramids and basotect, Solvent-free, Elastoplastic, Single-component special polymer adhesive, Fast-curing and more universal than structural and assembly adhesives, Especially for the punctual and all-over adhesion of soundproofing and acoustic elements made of foam in particular melamine and polyurethane foam, Adheres to customary construction substrates such as concrete, plaster, masonry, cement and wood, 310 ml/ 490 g Cartridge, For 0.5 m² to 3 m² depending on the substrate and adhesive technology (punctual/ all-over), Note: Working temperature + 5° C to + 50° C, Storage: Cool and dry at + 5° C to + 25° C, Skin building time: 10 - 15 min, Colour: White, Consistency: Pasty, Base: Polymer dispersion, Spec. mass: Approx. 1.58 g/cm, Protect from frost and heat, Suitable hand-held cartridge gun: Article Nr. #417630# (not included), New follow-up product: Article Nr. #481723# (not included)
t.akustik Rehearsal Room Set S Prof.
30362.5 NOK
t.akustik Rehearsal Room Set S Prof.@+*Bundle offer comprising*, 6x t.akustik Highline CBT2 Birch Wood@+*Corner Bass Traps*, Absorber for optimising room acoustics, High-quality polyester acoustic foam with high density (40 kg/m³ net nominal weight +/- 5 kg tolerance) and dense structure especially for the absorption of low frequencies, Main effective range: 80 to 500 Hz, Material: Polyester acoustic foam, Flame-retardant in accordance with FMVSS 302 Burning rate <100 mm/min, Individually removable acoustic panels, Dimensions: 400 x 400 x 600 mm, Colour: Anthracite / Birch, Package quantity: 2 pieces, 8x t.akustik Spektrum A10 Absorber GR@+*Acoustic Absorber*, For medium and high frequencies, Efficiency rate: at 200 Hz approx. 50% absorption, complete absorption above 500 Hz, Effective range: from approx. 315 Hz, For optimising surround sound in recording studios, home theatres, and in home recording applications, Material: 12 mm birch plywood filled with mineral wool, Covered with grey fabric, Dimensions: 600 x 600 x 100 mm, Weight: 4.4 kg, Colour: grey, Includes 4 mounting clips for wall mounting (screws are not included, must be purchased separately), 2x t.akustik Diffusor Manhattan GR eps set@+*Diffuser Acoustic Elements*, Made of hardened EPS foam, For optimising room reflections and room sound, Suitable for recording studios, radio stations, home recording, and hi-fi rooms, Effective range: Approx. 900 - 3,250 Hz, Easy assembly and disassembly, Dimensions: 600 x 600 x 150 mm, Box contains 2 units as a kit including assembly instructions, One kit consists of 13 single elements, Colour: Graphite@+*Note:* Acoustic adhesive is recommended for preparation and attaching -- Article Nr. #481723# (not included), Thomann Hand-Kartuschenpistole@+*Hand sealant gun*, For t.akustik acoustic glue in 310 ml cartridges (not included, must be ordered separately), Hexagonal plunger rod, Red lacquer finish, 3x t.akustik Contact Glue@+*Acoustic Adhesive*, For acoustic convoluted, pyramids and basotect, Solvent-free, Elastoplastic, Single-component special polymer adhesive, Fast-curing and more universal than structural and assembly adhesives, Especially for the punctual and all-over adhesion of soundproofing and acoustic elements made of foam in particular melamine and polyurethane foam, Adheres to customary construction substrates such as concrete, plaster, masonry, cement and wood, 310 ml/ 490 g Cartridge, For 0.5 m² to 3 m² depending on the substrate and adhesive technology (punctual/ all-over), Note: Working temperature + 5° C to + 50° C, Storage: Cool and dry at + 5° C to + 25° C, Skin building time: 10 - 15 min, Colour: White, Consistency: Pasty, Base: Polymer dispersion, Spec. mass: Approx. 1.58 g/cm, Protect from frost and heat, Suitable hand-held cartridge gun: Article Nr. #417630# (not included), New follow-up product: Article Nr. #481723# (not included)
t.akustik Rehearsal Room Set S Premium
14862.5 NOK
t.akustik Rehearsal Room Set S Premium@+*Bundle offer comprising*, 2x t.akustik Highline A1 Silver Spruce@+*Absorber Set*, Optimises room acoustics, Main frequency range: approx. 400 to 3150 Hz, Material: Polyester acoustic foam, Flame retardant in accordance with FMVSS 302, Burning rate: < 100 mm/min, Dimensions per absorber panel (W x D x H): 600 x 600 x 70 mm, Colour: Anthracite/Silver Spruce, Set content: 4 Absorber panels, 2x t.akustik Diffusor Manhattan GR eps set@+*Diffuser Acoustic Elements*, Made of hardened EPS foam, For optimising room reflections and room sound, Suitable for recording studios, radio stations, home recording, and hi-fi rooms, Effective range: Approx. 900 - 3,250 Hz, Easy assembly and disassembly, Dimensions: 600 x 600 x 150 mm, Box contains 2 units as a kit including assembly instructions, One kit consists of 13 single elements, Colour: Graphite@+*Note:* Acoustic adhesive is recommended for preparation and attaching -- Article Nr. #481723# (not included), 6x t.akustik Highline CBT1 Silver Spruce@+*Corner Bass Traps*, Absorber for optimizing room acoustics, Especially suitable for the absorption of low-frequency sound waves, Material: Polyester acoustic foam, Main frequency / effective range 80 to 1000 Hz, Flame-retardant according to FMVSS 302 Burn rate <100 mm / min, Dimensions: 370 x 370 x 600 mm, Colour: Anthracite / silver spruce, Shipping quantity: 2 Pieces, Thomann Hand-Kartuschenpistole@+*Hand sealant gun*, For t.akustik acoustic glue in 310 ml cartridges (not included, must be ordered separately), Hexagonal plunger rod, Red lacquer finish, 7x t.akustik Contact Glue@+*Acoustic Adhesive*, For acoustic convoluted, pyramids and basotect, Solvent-free, Elastoplastic, Single-component special polymer adhesive, Fast-curing and more universal than structural and assembly adhesives, Especially for the punctual and all-over adhesion of soundproofing and acoustic elements made of foam in particular melamine and polyurethane foam, Adheres to customary construction substrates such as concrete, plaster, masonry, cement and wood, 310 ml/ 490 g Cartridge, For 0.5 m² to 3 m² depending on the substrate and adhesive technology (punctual/ all-over), Note: Working temperature + 5° C to + 50° C, Storage: Cool and dry at + 5° C to + 25° C, Skin building time: 10 - 15 min, Colour: White, Consistency: Pasty, Base: Polymer dispersion, Spec. mass: Approx. 1.58 g/cm, Protect from frost and heat, Suitable hand-held cartridge gun: Article Nr. #417630# (not included), New follow-up product: Article Nr. #481723# (not included)
t.akustik Rehearsal Room M Prof.
55112.5 NOK
t.akustik Rehearsal Room M Prof.@+*Bundle offer comprising*, 10x t.akustik Highline CBT2 Birch Wood@+*Corner Bass Traps*, Absorber for optimising room acoustics, High-quality polyester acoustic foam with high density (40 kg/m³ net nominal weight +/- 5 kg tolerance) and dense structure especially for the absorption of low frequencies, Main effective range: 80 to 500 Hz, Material: Polyester acoustic foam, Flame-retardant in accordance with FMVSS 302 Burning rate <100 mm/min, Individually removable acoustic panels, Dimensions: 400 x 400 x 600 mm, Colour: Anthracite / Birch, Package quantity: 2 pieces, 16x t.akustik Spektrum A10 Absorber GR@+*Acoustic Absorber*, For medium and high frequencies, Efficiency rate: at 200 Hz approx. 50% absorption, complete absorption above 500 Hz, Effective range: from approx. 315 Hz, For optimising surround sound in recording studios, home theatres, and in home recording applications, Material: 12 mm birch plywood filled with mineral wool, Covered with grey fabric, Dimensions: 600 x 600 x 100 mm, Weight: 4.4 kg, Colour: grey, Includes 4 mounting clips for wall mounting (screws are not included, must be purchased separately), 4x t.akustik Diffusor Manhattan GR eps set@+*Diffuser Acoustic Elements*, Made of hardened EPS foam, For optimising room reflections and room sound, Suitable for recording studios, radio stations, home recording, and hi-fi rooms, Effective range: Approx. 900 - 3,250 Hz, Easy assembly and disassembly, Dimensions: 600 x 600 x 150 mm, Box contains 2 units as a kit including assembly instructions, One kit consists of 13 single elements, Colour: Graphite@+*Note:* Acoustic adhesive is recommended for preparation and attaching -- Article Nr. #481723# (not included), Thomann Hand-Kartuschenpistole@+*Hand sealant gun*, For t.akustik acoustic glue in 310 ml cartridges (not included, must be ordered separately), Hexagonal plunger rod, Red lacquer finish, 4x t.akustik Contact Glue@+*Acoustic Adhesive*, For acoustic convoluted, pyramids and basotect, Solvent-free, Elastoplastic, Single-component special polymer adhesive, Fast-curing and more universal than structural and assembly adhesives, Especially for the punctual and all-over adhesion of soundproofing and acoustic elements made of foam in particular melamine and polyurethane foam, Adheres to customary construction substrates such as concrete, plaster, masonry, cement and wood, 310 ml/ 490 g Cartridge, For 0.5 m² to 3 m² depending on the substrate and adhesive technology (punctual/ all-over), Note: Working temperature + 5° C to + 50° C, Storage: Cool and dry at + 5° C to + 25° C, Skin building time: 10 - 15 min, Colour: White, Consistency: Pasty, Base: Polymer dispersion, Spec. mass: Approx. 1.58 g/cm, Protect from frost and heat, Suitable hand-held cartridge gun: Article Nr. #417630# (not included), New follow-up product: Article Nr. #481723# (not included)
t.akustik Rehearsal Room Set XL Prof.
93000 NOK
t.akustik Rehearsal Room Set XL Prof.@+*Bundle offer comprising*, 18x t.akustik Highline CBT2 Birch Wood@+*Corner Bass Traps*, Absorber for optimising room acoustics, High-quality polyester acoustic foam with high density (40 kg/m³ net nominal weight +/- 5 kg tolerance) and dense structure especially for the absorption of low frequencies, Main effective range: 80 to 500 Hz, Material: Polyester acoustic foam, Flame-retardant in accordance with FMVSS 302 Burning rate <100 mm/min, Individually removable acoustic panels, Dimensions: 400 x 400 x 600 mm, Colour: Anthracite / Birch, Package quantity: 2 pieces, 24x t.akustik Spektrum A10 Absorber GR@+*Acoustic Absorber*, For medium and high frequencies, Efficiency rate: at 200 Hz approx. 50% absorption, complete absorption above 500 Hz, Effective range: from approx. 315 Hz, For optimising surround sound in recording studios, home theatres, and in home recording applications, Material: 12 mm birch plywood filled with mineral wool, Covered with grey fabric, Dimensions: 600 x 600 x 100 mm, Weight: 4.4 kg, Colour: grey, Includes 4 mounting clips for wall mounting (screws are not included, must be purchased separately), 8x t.akustik Diffusor Manhattan GR eps set@+*Diffuser Acoustic Elements*, Made of hardened EPS foam, For optimising room reflections and room sound, Suitable for recording studios, radio stations, home recording, and hi-fi rooms, Effective range: Approx. 900 - 3,250 Hz, Easy assembly and disassembly, Dimensions: 600 x 600 x 150 mm, Box contains 2 units as a kit including assembly instructions, One kit consists of 13 single elements, Colour: Graphite@+*Note:* Acoustic adhesive is recommended for preparation and attaching -- Article Nr. #481723# (not included), Thomann Hand-Kartuschenpistole@+*Hand sealant gun*, For t.akustik acoustic glue in 310 ml cartridges (not included, must be ordered separately), Hexagonal plunger rod, Red lacquer finish, 8x t.akustik Contact Glue@+*Acoustic Adhesive*, For acoustic convoluted, pyramids and basotect, Solvent-free, Elastoplastic, Single-component special polymer adhesive, Fast-curing and more universal than structural and assembly adhesives, Especially for the punctual and all-over adhesion of soundproofing and acoustic elements made of foam in particular melamine and polyurethane foam, Adheres to customary construction substrates such as concrete, plaster, masonry, cement and wood, 310 ml/ 490 g Cartridge, For 0.5 m² to 3 m² depending on the substrate and adhesive technology (punctual/ all-over), Note: Working temperature + 5° C to + 50° C, Storage: Cool and dry at + 5° C to + 25° C, Skin building time: 10 - 15 min, Colour: White, Consistency: Pasty, Base: Polymer dispersion, Spec. mass: Approx. 1.58 g/cm, Protect from frost and heat, Suitable hand-held cartridge gun: Article Nr. #417630# (not included), New follow-up product: Article Nr. #481723# (not included)
t.akustik Rehearsal Room Set M Premium
29862.5 NOK
t.akustik Rehearsal Room Set M Premium@+*Bundle offer comprising*, 4x t.akustik Highline A1 Silver Spruce@+*Absorber Set*, Optimises room acoustics, Main frequency range: approx. 400 to 3150 Hz, Material: Polyester acoustic foam, Flame retardant in accordance with FMVSS 302, Burning rate: < 100 mm/min, Dimensions per absorber panel (W x D x H): 600 x 600 x 70 mm, Colour: Anthracite/Silver Spruce, Set content: 4 Absorber panels, 4x t.akustik Diffusor Manhattan GR eps set@+*Diffuser Acoustic Elements*, Made of hardened EPS foam, For optimising room reflections and room sound, Suitable for recording studios, radio stations, home recording, and hi-fi rooms, Effective range: Approx. 900 - 3,250 Hz, Easy assembly and disassembly, Dimensions: 600 x 600 x 150 mm, Box contains 2 units as a kit including assembly instructions, One kit consists of 13 single elements, Colour: Graphite@+*Note:* Acoustic adhesive is recommended for preparation and attaching -- Article Nr. #481723# (not included), 12x t.akustik Highline CBT1 Silver Spruce@+*Corner Bass Traps*, Absorber for optimizing room acoustics, Especially suitable for the absorption of low-frequency sound waves, Material: Polyester acoustic foam, Main frequency / effective range 80 to 1000 Hz, Flame-retardant according to FMVSS 302 Burn rate <100 mm / min, Dimensions: 370 x 370 x 600 mm, Colour: Anthracite / silver spruce, Shipping quantity: 2 Pieces, Thomann Hand-Kartuschenpistole@+*Hand sealant gun*, For t.akustik acoustic glue in 310 ml cartridges (not included, must be ordered separately), Hexagonal plunger rod, Red lacquer finish, 12x t.akustik Contact Glue@+*Acoustic Adhesive*, For acoustic convoluted, pyramids and basotect, Solvent-free, Elastoplastic, Single-component special polymer adhesive, Fast-curing and more universal than structural and assembly adhesives, Especially for the punctual and all-over adhesion of soundproofing and acoustic elements made of foam in particular melamine and polyurethane foam, Adheres to customary construction substrates such as concrete, plaster, masonry, cement and wood, 310 ml/ 490 g Cartridge, For 0.5 m² to 3 m² depending on the substrate and adhesive technology (punctual/ all-over), Note: Working temperature + 5° C to + 50° C, Storage: Cool and dry at + 5° C to + 25° C, Skin building time: 10 - 15 min, Colour: White, Consistency: Pasty, Base: Polymer dispersion, Spec. mass: Approx. 1.58 g/cm, Protect from frost and heat, Suitable hand-held cartridge gun: Article Nr. #417630# (not included), New follow-up product: Article Nr. #481723# (not included)
t.akustik Spektrum D10 Diffusor
1761.25 NOK
t.akustik Spektrum D10 Diffusor, Diffuser, Diffuser with lattice structure, High-quality processed and visually appealing acoustic module, It promotes the feeling of spaciousness in acoustically small rooms and adapts visually to the existing interior, Exterior frame construction made of clear lacquered 12 mm birch multi-plex, Cell dividing walls made of clear lacquered 6.5 mm birch multiplex, Dimensions: 600 x 600 x 100 mm, Cell size: 76 x 76 x 100 mm, Weight: Approximately 4.85 kg, Includes 4 mounting clips for wall mounting (screws not included)
t.akustik Spektrum D30 Diffusor
2387.5 NOK
t.akustik Spektrum D30 Diffusor, Acoustic Diffuser, Based on a quadratic residue order for the dispersion of sound reflections, Increases the perceived spatiality of small and medium-sized rooms, Well-suited for recording studios, theaters and hi-fi environments, Effective frequency range: 1000 - 6000 Hz, Material: Plywood birch, Dimensions: 600 x 600 x 100 mm, Weight: 8.05 kg, Includes 4 mounting clips for wall mounting (screws not included)
t.akustik Spektrum D20 Diffusor
2387.5 NOK
t.akustik Spektrum D20 Diffusor, Diffuser, Two-dimensional QRD diffuser (based on prime number 7) with hemispheric sound scattering, Design frequency: 1307 Hz, Upper cutoff frequency: 2256 Hz, Scattering effect at low frequencies down to 654 Hz, High-quality processed QRD diffuser, Two-dimensional diffuser develops its scattering effect evenly in all spatial directions, Despite its low depth, broadband effect in the range from 654 Hz to 2256 Hz, Suitable for dissipating hard reflections in the middle frequency range and thus minimizing sound colourations due to flutter echoes and strong first reflections, without overpowering the room, Temporal dispersion of the sound, small spaces appear acoustically
t.akustik Rehearsal Room Set XL Premium
58237.5 NOK
t.akustik Rehearsal Room Set XL Premium@+*Bundle offer comprising*, 8x t.akustik Highline A1 Silver Spruce@+*Absorber Set*, Optimises room acoustics, Main frequency range: approx. 400 to 3150 Hz, Material: Polyester acoustic foam, Flame retardant in accordance with FMVSS 302, Burning rate: < 100 mm/min, Dimensions per absorber panel (W x D x H): 600 x 600 x 70 mm, Colour: Anthracite/Silver Spruce, Set content: 4 Absorber panels, 12x t.akustik Diffusor Manhattan GR eps set@+*Diffuser Acoustic Elements*, Made of hardened EPS foam, For optimising room reflections and room sound, Suitable for recording studios, radio stations, home recording, and hi-fi rooms, Effective range: Approx. 900 - 3,250 Hz, Easy assembly and disassembly, Dimensions: 600 x 600 x 150 mm, Box contains 2 units as a kit including assembly instructions, One kit consists of 13 single elements, Colour: Graphite@+*Note:* Acoustic adhesive is recommended for preparation and attaching -- Article Nr. #481723# (not included), 20x t.akustik Highline CBT1 Silver Spruce@+*Corner Bass Traps*, Absorber for optimizing room acoustics, Especially suitable for the absorption of low-frequency sound waves, Material: Polyester acoustic foam, Main frequency / effective range 80 to 1000 Hz, Flame-retardant according to FMVSS 302 Burn rate <100 mm / min, Dimensions: 370 x 370 x 600 mm, Colour: Anthracite / silver spruce, Shipping quantity: 2 Pieces, Thomann Hand-Kartuschenpistole@+*Hand sealant gun*, For t.akustik acoustic glue in 310 ml cartridges (not included, must be ordered separately), Hexagonal plunger rod, Red lacquer finish, 20x t.akustik Contact Glue@+*Acoustic Adhesive*, For acoustic convoluted, pyramids and basotect, Solvent-free, Elastoplastic, Single-component special polymer adhesive, Fast-curing and more universal than structural and assembly adhesives, Especially for the punctual and all-over adhesion of soundproofing and acoustic elements made of foam in particular melamine and polyurethane foam, Adheres to customary construction substrates such as concrete, plaster, masonry, cement and wood, 310 ml/ 490 g Cartridge, For 0.5 m² to 3 m² depending on the substrate and adhesive technology (punctual/ all-over), Note: Working temperature + 5° C to + 50° C, Storage: Cool and dry at + 5° C to + 25° C, Skin building time: 10 - 15 min, Colour: White, Consistency: Pasty, Base: Polymer dispersion, Spec. mass: Approx. 1.58 g/cm, Protect from frost and heat, Suitable hand-held cartridge gun: Article Nr. #417630# (not included), New follow-up product: Article Nr. #481723# (not included)
t.akustik Grid Diffusor
973.75 NOK
t.akustik Grid Diffuser, Diffuser, Acoustic element to optimise room acoustics, For the optimization of room reflections in the mid and hi-mid frequencies, Ideal for recording studios, home theaters or home recording applications, Material: Untreated pinewood, Dimensions (W x D x H): 600 x 600 x 97 mm, Price per piece
Hofa Diffusor Set nature
4762.5 NOK
HOFA Diffusor Set nature@+*Bundle offer comprising*, 2x HOFA Diffusor Natural@+*Diffuser*, Effective acoustic elements for the optimization of room sound, For the best possible acoustic, for example, in recording studios, home cinemas or home-recordings, For the optimization of room reflections in the mid and hi-mid frequencies, Two-dimensional QRD-Diffuser, Design in untreated birch plywood, For professional and better working conditions in recording and control rooms, For an audiophile Hi-Fi listening experience, Can be combined with the HOFA Frame for flexible room acoustics, Option on the back for frameless suspension, Dimensions: 500 x 500 x 110 mm, 36 Internal divisions, each 8 cm x 8 cm, Weight: approx. 2 kg, Colour: Natural, HOFA Frame 2 Modules@+*Exchange Frame*, Suitable for 2 corresponding HOFA acoustic modules, Allows variable room acoustics, Made of 19 mm waxed Beech timber, For mounting on the wall or ceiling, Wall-mounting materials included, Ceiling mounting material not included, Article Nr.#267871#, Dimensions: 104.5 x 54.5 x 12 cm, Weight: approx. 4 kg
t.akustik Diffusor Manhattan wood
3687.5 NOK
t.akustik Diffusor Manhattan Wood, Diffuser Acoustic Element, For optimisation of room sound and reflections, Suitable for recording studios, radio stations, home recording and hi-fi rooms, Material: Solid beech wood, plywood base plate, Effective range: Approximately 900 - 3650 Hz, Finish: Colourless lacquered natural wood, Easy to assemble and disassemble, Dimensions: Approximately 600 x 600 x 170 mm, Weight: Approximately 30 kg, Includes 1 piece as kit with assembly instructions., The kit consists of a base plate and individual blocks to be plugged in